Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:
Old Sep 21, 2015, 02:17 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: Wheels and Tires
Print Wikipost

All Lift & Tire questions go here!!!

Old Aug 29, 2012 | 11:33 PM
  #9331  
denbjornen's Avatar
Member
 
Joined: Jul 2012
Posts: 115
Likes: 0
From: Albuquerque, New Mexico
Year: 1999
Model: Cherokee
Engine: 4.0L Inline 6
Default

Hey guys,

I've got a rough country 3" lift in the front. But in the rear, I have around 5-5.5 inches. I want to level out the front of the truck using coil spacers. 2" to be specific. Is this a good idea? Are the shocks long/big enough to handle that much? Will my control arms be too short?

Last edited by denbjornen; Aug 29, 2012 at 11:37 PM.
Reply
Old Aug 30, 2012 | 06:21 AM
  #9332  
99superjeep01's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Originally Posted by denbjornen
Hey guys,

I've got a rough country 3" lift in the front. But in the rear, I have around 5-5.5 inches. I want to level out the front of the truck using coil spacers. 2" to be specific. Is this a good idea? Are the shocks long/big enough to handle that much? Will my control arms be too short?
I run 2" spacers and have never had any issues. If the control arms are stock then it'll be best to change them, if they came with the kit you can still use them. The ride won't be as nice though. Unless you frequently disconnect your sway bar and really flex, the shocks should be fine too.
Reply
Old Aug 30, 2012 | 06:25 AM
  #9333  
puckhound95's Avatar
Member
 
Joined: Aug 2012
Posts: 224
Likes: 0
From: South Jersey
Model: Cherokee
Engine: 4.0L Straight 6
Default

Originally Posted by Tom95YJ
Just by the daystar extended bumpstops and flex it out if it rubs glue a hockey puck to the coil pad and try again. Just make sure you are not bottoming out your shocks before you hit the bumpstop
What about for the rear?
Reply
Old Aug 30, 2012 | 06:29 AM
  #9334  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

Same thing. Buy extended stops and go from there.
Reply
Old Aug 30, 2012 | 07:32 AM
  #9335  
denbjornen's Avatar
Member
 
Joined: Jul 2012
Posts: 115
Likes: 0
From: Albuquerque, New Mexico
Year: 1999
Model: Cherokee
Engine: 4.0L Inline 6
Default

Originally Posted by 99superjeep01
I run 2" spacers and have never had any issues. If the control arms are stock then it'll be best to change them, if they came with the kit you can still use them. The ride won't be as nice though. Unless you frequently disconnect your sway bar and really flex, the shocks should be fine too.
Will the ride improve if I get control arm drop brackets?
Reply
Old Aug 30, 2012 | 07:37 AM
  #9336  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

Yes.
Reply
Old Aug 30, 2012 | 07:39 AM
  #9337  
99superjeep01's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Originally Posted by denbjornen

Will the ride improve if I get control arm drop brackets?
Having no personal experience with drop brackets I couldn't tell you for sure. I imagine it would help, but at the cost of losing clearance. But adding only 2" there's no real need to change your control arm setup.
Reply
Old Aug 30, 2012 | 08:33 AM
  #9338  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

Originally Posted by 99superjeep01
Having no personal experience with drop brackets I couldn't tell you for sure. I imagine it would help, but at the cost of losing clearance. But adding only 2" there's no real need to change your control arm setup.
If you say so...

I ran drop brackets for about 2 years.

I can tell you two things:

1. At 5.5 inches of lift... drop brackets will SERIOUSLY improve your ride and handling.

2. Unless you're running the Rubicon every day and crawling 3 foot diameter boulders then I BET you'll never hang up on the drop brackets. They're so close to the wheel that it takes some fancy situations to hit them on anything. Average trail riding won't do it.


Make that three things...

There's a big difference in how things need to be done between 3.5" lift and 5.5" lift... There's more to it than "only 2 inches"
Reply
Old Aug 30, 2012 | 08:39 AM
  #9339  
99superjeep01's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Originally Posted by lowrange2

If you say so...

I ran drop brackets for about 2 years.

I can tell you two things:

1. At 5.5 inches of lift... drop brackets will SERIOUSLY improve your ride and handling.

2. Unless you're running the Rubicon every day and crawling 3 foot diameter boulders then I BET you'll never hang up on the drop brackets. They're so close to the wheel that it takes some fancy situations to hit them on anything. Average trail riding won't do it.

Make that three things...

There's a big difference in how things need to be done between 3.5" lift and 5.5" lift... There's more to it than "only 2 inches"
That's exactly why I started off by saying I've had no personal experience with drop brackets. I run long arms.
Reply
Old Aug 30, 2012 | 08:49 AM
  #9340  
99superjeep01's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Originally Posted by lowrange2

There's a big difference in how things need to be done between 3.5" lift and 5.5" lift... There's more to it than "only 2 inches"
And not necessarily. I started off with 2" spacers in my first XJ then got a pro comp 3" kit. That gave me pretty much the same set up he's looking to get. I ran the shocks and control arms that came with the 3" kit and it worked fine. Flexed well enough, but it rode like a brick lol. Sure you can argue fine points, but I was speaking from a suspension p.o.v. Adding 2" spacers will not mandate other changes. But id you want to take others things into account, then he'll be looking at longer brake lines, some sort of SYE, stuff like that.
Reply
Old Aug 30, 2012 | 09:00 AM
  #9341  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

Originally Posted by 99superjeep01
That's exactly why I started off by saying I've had no personal experience with drop brackets. I run long arms.
I had drop brackets but needed more cool points so I now have long arms.

Originally Posted by 99superjeep01
And not necessarily. I started off with 2" spacers in my first XJ then got a pro comp 3" kit. That gave me pretty much the same set up he's looking to get. I ran the shocks and control arms that came with the 3" kit and it worked fine. Flexed well enough, but it rode like a brick lol. Sure you can argue fine points, but I was speaking from a suspension p.o.v. Adding 2" spacers will not mandate other changes. But id you want to take others things into account, then he'll be looking at longer brake lines, some sort of SYE, stuff like that.
Right, that's my point. To do it correctly and not have it ride like a brick with square wheels... there are other things that need to be addressed.
Reply
Old Aug 30, 2012 | 09:11 AM
  #9342  
99superjeep01's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Originally Posted by lowrange2

I had drop brackets but needed more cool points so I now have long arms.

Right, that's my point. To do it correctly and not have it ride like a brick with square wheels... there are other things that need to be addressed.
More cool points lol. Yeah we're on the same track.
Reply
Old Aug 30, 2012 | 10:25 AM
  #9343  
fitrider250's Avatar
Newbie
 
Joined: Jul 2012
Posts: 27
Likes: 0
From: Santa Rosa California
Year: 1995
Model: Cherokee
Engine: 4.0L highoutput
Default

is it better to have wide tires or tires still in fender?
Reply
Old Aug 30, 2012 | 10:29 AM
  #9344  
puckhound95's Avatar
Member
 
Joined: Aug 2012
Posts: 224
Likes: 0
From: South Jersey
Model: Cherokee
Engine: 4.0L Straight 6
Default

Originally Posted by fitrider250
is it better to have wide tires or tires still in fender?
Depends. More narrow tires will give you better mpg, but will dig in soft ground more. Wider tires have the opposite effect.
Reply
Old Aug 30, 2012 | 11:01 AM
  #9345  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

Originally Posted by fitrider250
is it better to have wide tires or tires still in fender?
That's simply a matter of opinion. On something I drive every day... I prefer narrow tires.

On my trail junk I prefer wider tires.
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:37 AM.