Need Help New To Jeeps... Have 1995 Cherokee Sport XJ.... Everything is Stock... Any one know the specs for it...

 

What specs are you looking for? Check the helpful links thread for stock specs

https://www.cherokeeforum.com/f48/helpful-links-10052/

 

Do you just use the standard screw in style found at all parts stores, or are there some that work better than others?

 

So i just ordered my new 33x12.50x15 kumho road venture m/t kl71's today and was just wondering if anybody has used them before. They are pretty new on the market i guess.

 

Hey, Guys,
I'm still collecting parts to do my 2.5"- 3" budget lift with bastard pack, and I'm getting down to the nuts & bolts...literally.
My question is:
Where is a good place to get new u-bolts, center pins and leaf spring clamps?
There are no "spring shops" anywhere near me...
All the performance shops in the area are of the "Pimp My Ride" type...(They'll try to sell me chrome bead-lock 35" spinners...YUCK! ).

Is there a part # for a u-bolt for a 3" lift? (1989 XJ, btw...)
Center pins? (I'll be using S-10 leaves w/ XJ leaves)..
I imagine I can get leaf spring clamps at a decent parts store, like maybe NAPA?
Will I need front swaybar end extensions with a 2.5" - 3" lift, or are disco's the way to go??

I want to do this right, and ONCE....and I'm the kind of guy who wants to have all the parts I'll need when I start the job..because it always seems like I break critical parts at 6PM on Sundays... ....so I want to be prepared.

Thanks for any & all help and advice!

 

^^^^^ Hello? Anybody?

 

for the clamps and center pin unless your doing this like to night
rustys seems to have quick shipping
http://rustysoffroad.com/mm5/merchan...gory_Code=Leaf

here is some u bolts
http://rustysoffroad.com/mm5/merchan...gory_Code=Leaf


maybe check NAPA for the u bolts also if they have them or not


HTH

 

Cool...
That's exactly what I was looking for.
Thanks, Rewster!

 

I would like to put a 3" lift on my 91 cherokee. Will the add a leaf work if my stock springs are sagging or will i have to go for new rear leafs? Will I have to extend brake lines or modify the steering?
Does anyone have a good instructional post on this site? Is there an easiest to install kit?
Any and all information is appreciated and welcomed. Thanks in advance.

 

here is a write up
https://www.cherokeeforum.com/f51/how-install-lift-xj-all-read-238/

you might need to do this
https://www.cherokeeforum.com/f51/how-relocate-your-track-bar-4919/

you will need either a longer rear brake line oor and extender

line vvv
http://www.autozone.com/autozone/cat...entId=cat10005

extender vvv
https://www.cherokeeforum.com/f61/howlers-items-5147/

as for the AAL on saging leafs you might not get the full 3" out of them, everybody says full packs are better but you do what you do when moneys tight

HTH

 

hey i rele wanna do a 6" lift with 35s i knw i need sye and custom drive shafts and i wanna gear it with 410s but will the stock axels hold up with 35s?

also i plan on swappin the rear with a ford 8.8 disk rear is that worth swappin?

 

Yep the 8.8 will be worth it. The front D30 should be fine. Also you want much lower gears then 4.10's for 35's...I would go eithe r4.56's or 4.88's...

 

o ok nice so ill swap for the 8.8 and keep the 30 in the front now i plan on still being able to do highway in this so shud i do the 456s rather then 488s?

 

4.56's would be the highest I would go but I still think 4.88's but that's just me. I plan on 4.10's on 31's..

 

ya im gonna jus do 456s so ill have a lil more highway speed lol