I just blew up my 99 cherokee and I figured while I was rebuilding the engine it would be a good time to stroke it. I have been asking around and have heard that the 99 is not the best year for a stroker project.

If the 99 is a bad year for a stroker WHY
IF it is a good year what would be needed other than a crank and rods from a 4.2

I have about a $1500 budget and would love to get around 270hp
all machinest work will be done for around $400 so that leaves me with $1100 for components can 270 be obtained on this budget.

 

I think some of the 99's had the head that was prone to cracking.

 

If I switched the head to a different year would this solve the problem if so what year of head

 

I'm interested in this thread, i recently picked up a 4.0 out of a 97 that i plan to stroke as well and don't wanna dump any money into it until i know exactly what the quirks of certain year 4.0's tend to be, good thread.

 

99 is a good year. the 0331 head casting is the bad casting. it came in the 00/01 cherokees.

 

start reading up

http://www.ajeepthing.com/stroker-motor.html
http://www.jeepstrokers.com/forum/
http://www.angelfire.com/my/fan/stroker.html


just a few....

 

This is what I thought but a couple of weeks ago I swear I read something about some of the late 99's having the 0331 head. But I'm probally wrong. lol

 

great this is good info thanks

where is the casting # located on the head so I can check it out

where can I get 4.2 rods I can get a crank at autozone for $200 but I cannot find the rods