99 4.0 bad year for stroker project
I just blew up my 99 cherokee and I figured while I was rebuilding the engine it would be a good time to stroke it. I have been asking around and have heard that the 99 is not the best year for a stroker project.
If the 99 is a bad year for a stroker WHY IF it is a good year what would be needed other than a crank and rods from a 4.2 I have about a $1500 budget and would love to get around 270hp all machinest work will be done for around $400 so that leaves me with $1100 for components can 270 be obtained on this budget. |
I think some of the 99's had the head that was prone to cracking.
|
If I switched the head to a different year would this solve the problem if so what year of head
|
I'm interested in this thread, i recently picked up a 4.0 out of a 97 that i plan to stroke as well and don't wanna dump any money into it until i know exactly what the quirks of certain year 4.0's tend to be, good thread.
|
99 is a good year. the 0331 head casting is the bad casting. it came in the 00/01 cherokees.
|
start reading up
http://www.ajeepthing.com/stroker-motor.html http://www.jeepstrokers.com/forum/ http://www.angelfire.com/my/fan/stroker.html just a few.... |
Originally Posted by 96_xj
(Post 839905)
99 is a good year. the 0331 head casting is the bad casting. it came in the 00/01 cherokees.
|
great this is good info thanks
where is the casting # located on the head so I can check it out where can I get 4.2 rods I can get a crank at autozone for $200 but I cannot find the rods |
All times are GMT -5. The time now is 08:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands