9.25" axles
Thread Starter
Member
Joined: Dec 2011
Posts: 212
Likes: 1
From: Waskom, Texas
Year: 2001
Model: Cherokee
Engine: 4.0
9.25" axles
Anyone stuffed a set of 9.25" Dodge truck axles under an XJ?
If so, did you find the extra width a good thing or was it a problem on the trails?
Fabbing them in isn't an issue and swapping to rear coils won't be a problem either.
The only problem I can think of would be driveshaft clearance (left to right). I believe the front pinion will be further to the left than on the stock axle. I'll have to measure to see if it will be a problem.
Input?
If so, did you find the extra width a good thing or was it a problem on the trails?
Fabbing them in isn't an issue and swapping to rear coils won't be a problem either.
The only problem I can think of would be driveshaft clearance (left to right). I believe the front pinion will be further to the left than on the stock axle. I'll have to measure to see if it will be a problem.
Input?
Last edited by ETexas XJ; Dec 17, 2011 at 09:41 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)