4:1 Transfer Case Upgrade
#17
Senior Member
Join Date: Mar 2011
Location: VA
Posts: 770
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee (XJ)
Engine: 4L, 6 cylinder, 190 hp, 225 ft lp torque
If you decide to empty your bank account and go for the Atlas, please read my whole thread to see what your getting into.
https://www.cherokeeforum.com/f67/at...lation-190099/
The existing cross member will not bolt back in place without major modifications or relocation. Maybe it does if you have the automatic trans, I have a standard trans. I also didn't try clocking it high and working the floor boards out of the way, maybe that would have worked and I could have bolted the cross member back into the original location.
https://www.cherokeeforum.com/f67/at...lation-190099/
The existing cross member will not bolt back in place without major modifications or relocation. Maybe it does if you have the automatic trans, I have a standard trans. I also didn't try clocking it high and working the floor boards out of the way, maybe that would have worked and I could have bolted the cross member back into the original location.
#18
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Lol Jake who here has ever heard of a hero case?
Buy an atlas and be done. Should already have a long arm crossmember do you can just build new skids off that
Buy an atlas and be done. Should already have a long arm crossmember do you can just build new skids off that
#19
Banned
Thread Starter
Join Date: Jul 2014
Location: Las Vegas
Posts: 820
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
Good link ...
If you decide to empty your bank account and go for the Atlas, please read my whole thread to see what your getting into.
https://www.cherokeeforum.com/f67/at...lation-190099/
The existing cross member will not bolt back in place without major modifications or relocation. Maybe it does if you have the automatic trans, I have a standard trans. I also didn't try clocking it high and working the floor boards out of the way, maybe that would have worked and I could have bolted the cross member back into the original location.
https://www.cherokeeforum.com/f67/at...lation-190099/
The existing cross member will not bolt back in place without major modifications or relocation. Maybe it does if you have the automatic trans, I have a standard trans. I also didn't try clocking it high and working the floor boards out of the way, maybe that would have worked and I could have bolted the cross member back into the original location.
Thread
Thread Starter
Forum
Replies
Last Post
blueseasons
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
10
12-04-2015 01:53 AM
XJOZ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
11-23-2015 04:14 PM
Derkis1989
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
11-18-2015 08:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)