Ok so I have a 2001 xj currently with 265/75r17x9 with a 4.5 inch rusty lift an just bought a set of 20x12s 4.77 bs I wondering if I could run a 6.5 rusty long arm without any rubbing or scrubbing I don't wanna trim an don't really like the look of flat flares its my dd an its pretty clean is why I don't wanna trim don't see many people running 20x12s so hoping for some advice

 

20s on a cherokee? Just lol

 

Very helpful post... I like the looks of it though
www.customwheeloffset.com/wheel-offset-gallery/33199/1998-jeep-cherokee-gear-alloy-big-block-rustys-off-road-suspension-lift-8in
​​​​in

 

You mean this https://www.customwheeloffset.com/wh...sion-lift-65in
We call that a brodozer or a mall crawler,Something that will never go off road.

 

You have got to be kidding me....

 

 

There's a reason for this....but as roninofako said

 

Don't plan on wheeling with those. That's my tip for the day

 

You guys are like a bunch of broken records....

OP, yes. It will work.

 

 

Do it and post some pics. I think it would look good with some toyo proxes or nitto 420's. But if you plan on going offroad 20's would be a bad idea.

 

rawr.

 

It's going to look like a bro-truck but maybe thats what the OP is after?

OP - it will fit as long as you calculate the backspacing properly.

 

I think with that combination and lift, as long as you aren't going to wheel it, you may get away without any rubbing.

 

I'm thinking turning lock to lock it might rub but its hard no say most of us never run a rim bigger then a 18 inch.