2000 Cherokee cylinder 6 misfire HELP

Subscribe
Aug 28, 2011 | 06:11 PM
  #1  
I changed the plugs first off and I figured that would be it, because the old plugs were rusted and BEAT. I put the new ones in and it runs worse than it did before.. help me out with ideas. Thanks
Reply 0
Aug 28, 2011 | 07:44 PM
  #2  
Your wires could have been bad before you switched plugs, and by moving the wires around during the process, it could have made them worse than before.
Reply 0
Aug 28, 2011 | 08:26 PM
  #3  
I don't have wires. It's a coil rail
Reply 0
Aug 28, 2011 | 08:31 PM
  #4  
Oh, my bad. I just did a wire swap on my 89, so i was assuming your jeep was the same as mine.
Reply 0
Aug 28, 2011 | 08:35 PM
  #5  
No your good. I have an 89 also. But this 2000 is BUGGIN. I don't know what it can be.
Reply 0
Aug 28, 2011 | 08:41 PM
  #6  
Ya this 89 has been a pita. I just got done building it up to a 4.7 and i had to go through all of the electrics and i finally got it runnin yesterday. It has no exhaust yet and that thing is loud! Sorry i cant help ya.
Reply 0
Aug 28, 2011 | 08:53 PM
  #7  
Sounds awesome dude. Congrats. Good luck
Reply 0
Aug 28, 2011 | 08:59 PM
  #8  
Thanks a lot man.
Reply 0
Subscribe
Currently Active Users (1)