thank you for the link Sir, maybe i will get a bob's coil spacer,but not the shackles ^^ my leafspring is really bad it doesnt have any arch on it. Thank you again.

 

Oh okay Sir,thank you. i watched matt on bleepinjeep ,he did a bastard pack and he did not change the u bolts, tsk tsk. Bad Matt i guess i should put it on the list

 

About a year ago I bought parts from Crown Auto that got me 2” of lift over stock height. New springs front and rear, leaf spring bushings, front spacers, u-bolts and nuts.

This is a combo put together by one of the guys at the Crown retail location in Canton, MA. It's not an official "kit", it was just recommended by one of the guys there when I asked for an inexpensive lift alternative.

Leaf Spring, Rear #4886186 2ea
Bushing, Leaf Spring #52000503 2ea
Bushing, Leaf Spring #52000504 2ea
Spring, Coil, Front #52001125 2ea
U-bolt #52004010 4ea (for 8.25 rear end)
Nut, Flanged Hex #6502697 8ea
No part number given for the front coil spacers

I purchased and picked up the parts at the retail shop in Canton, MA. I paid $327 for everything, including tax. I know they don’t ship out of state so you’ll need to order the parts from one of their distributors.

 

Do you know how much those coils lift without the spacers?

 

I went out and measured the spacers. As I suspected, they measure just about 1.75”. I know I measured a 2” lift from stock height right after I installed the springs and spacers, so my best estimate is these coils in my experience will provide .25” of lift over stock height.