1998 XJ 4x4 Issue
Thread Starter
Newbie
Joined: Aug 2022
Posts: 21
Likes: 0
From: El Paso
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
I have a 3in lift with 33in tires. I noticed when I bought it that it was in 4Hi even though visually it was in 2 wheel drive. I looked it up and it seemed like an easy fix with the little 1/2in bolt under the driver side. After adjusting, 2wheel drive is fine. 4hi and 4lo make this clonking as I drive about 10mph every half second. I dont suppose it's normal but it is a cherokee. Anyone have ideas? Thanks in advance.
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
I suggest you re adjust it, starting in 4LO. That is the one that is hardest to hit. Then see if you have noises from there
Thread
Thread Starter
Forum
Replies
Last Post
bowlth
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Feb 22, 2013 08:19 AM
MrScottish
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Nov 6, 2010 10:50 AM
trans_am7935
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Nov 4, 2010 06:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



