jeepguy93

2000 jeep cherokee xj
6 in lift long arm
5x 33 in bf goodies BRAND NEW
120k
new positraction dif
4:10 gears
9000lb winch
cb radio
ac/heat
4.0L
Front winch bumper with winch
Rear bumber with tire carrier
Rock rails
Perfect interior and exterior

Cost is 4000 this is the grey/silver one

Oooooooor


-Mileage: 165,780
-Automatic Engine 6-Cyl, 4.0 Liter
-Interior in great condition, non smoker
-1994 black Jeep Cherokee Country 4 door, 4 wheel drive, some paint oxidation on hood and rear hatch
Power windows and lock
-lifted 8 inches; 6.5" suspension with 2" coil spacer and rear leaf shackle
-BFG all terrians 33x12.5's with 15" black bead locker look wheels with wheel bolt lock key.
-Both front and rear drive shafts custom to lift size
-Both front and rear bumpers custom all steel with D-rings.
-Pioneer Premier Stereo deck
-CB radio
-Roof Rack

Cost is 3400 its the black one in pics



I'm having a tonn of trouble choosing!! help! Both are bone stock on the engine have dana 30 front 8.25 rear no skid plates. Ahhh. The first 5 pics are of the 2000 and the last 4 are of the 94. Please help!

mrfajita

Personally I would go for the 94 because i prefer the first gen bodystyle, its really up to you. Find out the mileage of the 00, how well the lifts are installed, and make sure the 00 doesn't have a cylinder head with casting number 0331 (those are known to crack if you overheat, which you will)
Also, are these both in Aurora, or in different parts of CO?

jeepguy93

The 2000 has 120000 miles. Both lifts installed professionally along with all sye and driveshafts. I like the 94 more as well. What are some pros and cons I should look for. And one is in lakewood one is in co springs

mrfajita

Like I mentioned, the 0331 head that cracks on the 00 and 01 models.
Older ones are a bit easier to work on and modify, especially the engine and interior.
Newer ones have a much fancier interior
The c8.25 axle used in the newer XJs is a much stronger differential than the old c8.25, same with the d30s.
The 00 will have a slight amount more power because of some refinements to the engine.

I'm probably forgetting a few things, but off the top of my head, there is a short list of pros/cons.

jeepguy93

Sooo if I were to put the 4.7 liter engine in tht I want. (Look in my other recent threads) into the 94 it would have 280 horsepower so I think that's what ill do! Like the idea???

jeepguy93

Also that stroker fits perfectly into mine the guy said! So that's even better! Then I am going to take the axles off that jeep with the 4.7 throw them on the 94 and have a and so ill have an 89 with a 94 engine and axles and ill have a 94 with a nice setup in engine and axles all for like 7500 then I can resell the 89 for 2000 and only be into the 94 with a brand new stroker and nice axles and everything for around 5500! Like the idea???

mrfajita

The 4.7 would be awesome but definitely replace the axles, those have enough torque to shred the stock ones.

jeepkid46

The 00 could have a low pinion 30 which less ground clearence i love my 94

jeepguy93

Ya exactly hahah that's why I would buy the 94 for 3500 then the 89 for 4300 switch the axles and gears and engines over and then sell the 89 for a couple thousand like 2300 and have like 7800 total - 2300 so I would have spent 5500 on the 94 with a 4.7 stroker a trussed ford 9 rear and 30 front plus a ton of other **** ! Think its a good deal????

jeepguy93

Who likes the idea of a 94 xj on a 8.5 long arm lift with a ford 9 in the rear 30 up front 4:10 gearing 33inch tires np231 t case 4.7 liter stroker engine with 280hp auto tranny!

jeepkid46

Sounds awesome whats done to the 30

jeepkid46

My next question is how much have you wheeled if your a begginer i would say thats a bit much to start with but if you know your way sounds awesome

jeepguy93

The 30 is regeared to 410 rebuilt and strengthened has smaller diff covers

jeepguy93

I know it may be a bit much but I totaled my car (again not my fault) so I'm gettin some nice insurance money... I might as well do it when I have the chance and the funds so I can learn!

jeepguy93

I know a tonnnn about jeeps and do all my own work so I think this will be a reallly good project starter!!!