Tried to take the hub off in less than an hour after work, didn't budge. Going to try the socket trick tomorrow and see if I can change the u and ball joints on the passenger side in 3 hours before dark.

 

Thanks

Great, one more thing to do tonight
Expect some before and after pics later I guess

 

scored a multi function switch at the jy. no biggie.
However I did grab a factory gas tank skid off an up country '97 for $16. oh yeah

 

the socket trick works well. It helps to have another person to turn the wheel while you watch or vise versa

 

Unscrew hub bolt 1/4"
Place socket on it
Beat it with a hammer
Rinse and repeat

I think im just gonna respond to some of these with "use a hammer"
Seems to be all I say anyway

 

Yea, going to use an extension instead so it's easier to go to the next bolt.

 

replaced the multi function switch. no more driving for three miles before realizing the turn signal is still on.

 

Installed ceramic brake pads (PowerStop $36).
Supposed to have better stopping power compared to OE semi-metallic. After testing them out, seems to perform better under hard braking.

 

Replaced the top power steering hose and CPS, makes me want to start a thread on things you never want to do again.

Going to try get the parking brake adjusted before dark then try and find simple instructions to find out why I have a P1694 code. The new CPS fixed the poor running but didn't take care of the P1694 at the same time like I had hoped.

 

Monstalined the hood and new header panel, paint was shot on the hood and I had plenty of stuff left from when I did the roof not too long ago.

 

Realized my suspension is almost old enough to drink.

 

Well today I mowed down a 4 point traveling 55mph.
My stubby took the impact. Still minor damage to the corner.

 

My civic is at 4 deer kills lol. One for left milk all over

 

.

 

Well... Not really what I did, but what was did to me...Honda accord went underneath me. We will see how this carries out, I had full coverage on my jeep that had 290,003 miles on it