I replaced my valve cover gasket and gave my valve cover a fresh coat of black paint.

 

Also this past weekend I replaced the belt and idler pulley, the alternator, o2 sensor, fuel filter, a/c compressor, reciever drier, expansion valve, spark plugs, ignition wires, distributor cap, rotor, and condensor fan. Things to fix next is the starter, both battery cables, battery, charcoal canister, fuel pump, fan and fan clutch. Im trying to make my jeep a very reliable vehicle.

 

I fixed my driver side leather seat heater. :-)

 

Removed all the goofy pin striping, swapped out the master lock/window switches on the drivers side.. Also did a temp fix on a trany cooler line which was leaking..gotta get down and get some hose and redo it completely...darn factory trany cooler..

 

Started unhooking hoses and wires to start pulling the head.

 

Bought me an XJ last week. 94, white, country, 4.0 that happened to have a new set of michelin xtl's.

Fan belt squeeling, bought replacement, was given a shorter belt, returned it for the correct one, installed, tried to tighten and realized the last owner had neglected to reinstall two of the ps pump bolts. bought bolts, installed, all is good.
cleaned the past owner's puppy dog hair from every crevice, tightened various bolts, screws, rear seat latch hubs, and lubed the window tracks.
started a list of must needs and what i can put off.
having the tranny flushed and refilled next week, flushing and cleaning out the coolant system this weekend.

Great site guys!!

 

saw it get towed to the shop...

 

took it muddin with a lady friend and she loved it said later to my friends i was muddin with and gave her a ride home. talked to her for an hour and then decided were going bowling until midnight tomorrow night and then left. oh yeah, took the muffler back off..i love the loud exhaust more.

 

cf sticka



got it dirtay..girl i took wheeling wrote that stuff. she loved going muddin

 

I lifted my jeep yesterday, put 35's on it and then found out I have a death wobble. Today found that my track bar bolt was loose and trimmed the front fenders.

 

this is a good example of the daily chores of a jeep owner

 

Finished Pulling the head going to take it to the shop MONDAY.

 

Fixed the leak in the oil filter adapter again. I also fixed the short in the brake and dash lights I created when I ran over the trailer wiring harness.

 

Updated my build thread. Got the front engine skid on today

 

I kicked mine today damn wiring crap..