What did you do to your Cherokee today?
Junior Member
Joined: Aug 2011
Posts: 72
Likes: 0
From: Denver, CO
Year: 1999
Model: Cherokee
Engine: 4.0
Yesterday I changed the exhaust manifold. Not as bad as i thought, but the intake and throttle body were very dirty/oily so it took an extra hour or two to clean those up. Took about 6 hours overall. I should have changed the motor mounts, but my other car had a flat tire so i couldn't get to the parts store
That will have to wait for another day. Oh and a week ago I flushed the cooling system and installed new thermostat and valve cover gaskets. WOOO MAINTENANCE 
That will have to wait for another day. Oh and a week ago I flushed the cooling system and installed new thermostat and valve cover gaskets. WOOO MAINTENANCE
Member
Joined: Feb 2012
Posts: 229
Likes: 0
From: Union County, NJ
Year: 2002
Model: Grand Cherokee
Engine: 4.0L
Replaced the IAC solenoid. Then installed my VHF/UHF radio. Funtimes running 10ga wire from the battery to the radio then the Cat6 for the microphone extension.
CF Veteran
Joined: Nov 2010
Posts: 3,251
Likes: 0
From: Frisco, Tx
Year: 1994
Model: Cherokee
Engine: 4.0
Decided after watching a wrongler Rubicon run a trail I couldnt get through (and had to back down, which almost flipped me) im fed up. Im parking her tonight, ripping my axles off, and buying a wagoneer for axles. Then its time to draw and fab a four link for the rear.
Now the hard part. I gotta buy a truck and a trailer. Im sick of driving 6 hours to the trail, then having to make sure I dont break so I can drive her home. Its time to thrash and not stress about the trip home.
Now the hard part. I gotta buy a truck and a trailer. Im sick of driving 6 hours to the trail, then having to make sure I dont break so I can drive her home. Its time to thrash and not stress about the trip home.
Member
Joined: Mar 2011
Posts: 179
Likes: 0
From: Palm bay Florida
Year: 1994
Model: Grand Cherokee
Engine: 318 v8
Well today was a busy day for the 94 ZJ it got new hub assemblies up front both sides new cv's both sides rotated the tires and flushed the break fluid cause it was brown
Newbie
Joined: Feb 2012
Posts: 5
Likes: 0
From: Little Rock
Year: 1989
Model: Cherokee
Engine: 4.0
problem attic #4
Pulled the head and discovered missing piston and a hole in the cylinder wall . It is an 89 and Im wanting to put a 99 in its place (engine) what should I be aware of
Seasoned Member
Joined: Sep 2010
Posts: 331
Likes: 0
From: Parma Ohio
Year: 1998
Model: Cherokee
Engine: 4.0
Originally Posted by white99xjclassic
Where at in northeast Ohio? I'm in alliance.
CF Veteran
Joined: Aug 2010
Posts: 8,387
Likes: 1
From: The Florida State University
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Dirt road. Wasn't even doing anything crazy, but I came around the corner face to face with a deer. Should've ran the bastard over...
CF Veteran
Joined: Aug 2010
Posts: 8,387
Likes: 1
From: The Florida State University
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
Seasoned Member
Joined: Apr 2011
Posts: 307
Likes: 0
From: Philadelphia
Year: 1999
Model: Cherokee
Engine: 4.0L straight 6
Yesterday i spent 25 minutes with a pressure washer removing the mud from Rausch ( body,under and engine bay) today i changed oil/filter and washed the air filter and intake tube. I had mud in the throttle bore, should i be scared?