somethings different
#1
Member
Thread Starter
somethings different
ok, last night at work. i was talking to one of the guys that built my parts jeep. him and i both believe my jeep seats higher then the parts jeep did. i don't see how this can be. we swapt everything over from the parts jeep to the sport. changed nothing. the parts jeep was a 95 laredo and my jeep is a 96 sport. any idea why my jeep would seat 2 to 3 inches taller. i'm happy it seat higher then the parts jeep. just don't understand why.
plus, the guy i bought the parts jeep from said my jeep flexes and crawls better then his did.
plus, the guy i bought the parts jeep from said my jeep flexes and crawls better then his did.
#2
CF Veteran
Join Date: Aug 2009
Location: Oshkosh, WI.
Posts: 4,118
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
did the parts Jeep have the up-country suspension pkg.? And just missing the factory skid plates before you got it. Send in for the build sheet of the parts jeep. http://www.jeep.com/wccsapp/universa...ull&category=U
#3
Member
Thread Starter
did the parts Jeep have the up-country suspension pkg.? And just missing the factory skid plates before you got it. Send in for the build sheet of the parts jeep. http://www.jeep.com/wccsapp/universa...ull&category=U
#5
Member
Thread Starter
oh, i know its not bent. the guy i bought it from hit somebody. but was not that bad. just pushed the bumper in and jacked one of the fender up. nothing major. i looked over the whole jeep from front to back when i put the axle under it. just to make sure it was not bent.
#6
Senior Member
Join Date: Sep 2009
Location: Olean NY where salt eats jeeps
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
Originally Posted by UPS rat
oh, i know its not bent. the guy i bought it from hit somebody. but was not that bad. just pushed the bumper in and jacked one of the fender up. nothing major. i looked over the whole jeep from front to back when i put the axle under it. just to make sure it was not bent.
#7
Member
Thread Starter
Trending Topics
#8
Senior Member
Join Date: Sep 2009
Location: Olean NY where salt eats jeeps
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
Originally Posted by UPS rat
skyjacker nitro 8000. the only thing i can think of is his had power everything. seats, windows, etc. i really don't think the extra wiring and motors would add that much weight to the jeep.
Thread
Thread Starter
Forum
Replies
Last Post
cr1d3r
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-29-2020 12:15 PM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-10-2015 09:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)