I'm at 4.5" right now and I really wanna bump up to 35s. Just wanna see some pics though.
Quote:
That looks pretty good. I'm just worried about clearence. Are u geared? I think 4.5" will work jjust with some major bump stops.Originally Posted by fathan16
5.5" long arms on 35's for ya
CF Veteran
Quote:
i take it by geared you mean are the axle gears different? i have 4.88 gears in this picture with spartan lockers... but that's with my 30/44 set up... right now both of those jeeps are on blocks hahaOriginally Posted by Future
That looks pretty good. I'm just worried about clearence. Are u geared? I think 4.5" will work jjust with some major bump stops.
as far as clearance goes, you should be fine as long as you tucked the rear and cut the front fenders... 35's will fit pretty easily
the lower you are the less bump stop you should need.... just get extended bump stops and glue some hockey pucks in to the correct height. thats what i did
Quote:
i take it by geared you mean are the axle gears different? i have 4.88 gears in this picture with spartan lockers... but that's with my 30/44 set up... right now both of those jeeps are on blocks haha
as far as clearance goes, you should be fine as long as you tucked the rear and cut the front fenders... 35's will fit pretty easily
the lower you are the less bump stop you should need.... just get extended bump stops and glue some hockey pucks in to the correct height. thats what i did
Ooooo good idea. Yeah the main thing I'm worried about is my gears. I'd go to 5.5" but I would need new control arms.Originally Posted by fathan16
i take it by geared you mean are the axle gears different? i have 4.88 gears in this picture with spartan lockers... but that's with my 30/44 set up... right now both of those jeeps are on blocks haha
as far as clearance goes, you should be fine as long as you tucked the rear and cut the front fenders... 35's will fit pretty easily
the lower you are the less bump stop you should need.... just get extended bump stops and glue some hockey pucks in to the correct height. thats what i did
CF Veteran
Quote:
keep it at 4.5" thats a good height. 35's will fit with less lift than that... my brothers zj, the one in that picture, actually has those same 35's on it now with the same lift it has on the picture, just a 4in... just depends on how much you want to cut. i'm thinking about lowering mine when i do my axle swapOriginally Posted by Future
Ooooo good idea. Yeah the main thing I'm worried about is my gears. I'd go to 5.5" but I would need new control arms.
Quote:
keep it at 4.5" thats a good height. 35's will fit with less lift than that... my brothers zj, the one in that picture, actually has those same 35's on it now with the same lift it has on the picture, just a 4in... just depends on how much you want to cut. i'm thinking about lowering mine when i do my axle swap
My fenders are cut pretty damn high. This is it with 33s Originally Posted by fathan16
keep it at 4.5" thats a good height. 35's will fit with less lift than that... my brothers zj, the one in that picture, actually has those same 35's on it now with the same lift it has on the picture, just a 4in... just depends on how much you want to cut. i'm thinking about lowering mine when i do my axle swap
Quote:
What size lift? Looks bigger tthan 4.5Originally Posted by morgan320i
I have 3.55's on my 35's is not the best but its fine, im getting 4.88's
Senior Member
I've got about 5" of bumpstop and some pretty good sawzall and sledge hammer work up front to stuff em. The km2's weren't bad to fit, they measured like 33.5" true but these q78's measure a true 35. If you regear and go to 35s, I suggest 4.88s. I have 4.56's and fawkin hate it.
4.5" with 35" KM2's
4.5" with 36" TSL's
4.5" with Q78's. (Basically a 35" TSL)
4.5" with 35" KM2's
4.5" with 36" TSL's
4.5" with Q78's. (Basically a 35" TSL)
CF Veteran
I would be interested to see the same thing...except with the Bushwacker Flat Flares...setup I'm looking towards.
