I'm at 4.5" right now and I really wanna bump up to 35s. Just wanna see some pics though.

 

5.5" long arms on 35's for ya

 

That looks pretty good. I'm just worried about clearence. Are u geared? I think 4.5" will work jjust with some major bump stops.

 

i take it by geared you mean are the axle gears different? i have 4.88 gears in this picture with spartan lockers... but that's with my 30/44 set up... right now both of those jeeps are on blocks haha

as far as clearance goes, you should be fine as long as you tucked the rear and cut the front fenders... 35's will fit pretty easily

the lower you are the less bump stop you should need.... just get extended bump stops and glue some hockey pucks in to the correct height. thats what i did

 

Ooooo good idea. Yeah the main thing I'm worried about is my gears. I'd go to 5.5" but I would need new control arms.

 

keep it at 4.5" thats a good height. 35's will fit with less lift than that... my brothers zj, the one in that picture, actually has those same 35's on it now with the same lift it has on the picture, just a 4in... just depends on how much you want to cut. i'm thinking about lowering mine when i do my axle swap

 

My fenders are cut pretty damn high. This is it with 33s

 

I have 3.55's on my 35's is not the best but its fine, im getting 4.88's

 

id like to see some pictures too

 

What size lift? Looks bigger tthan 4.5

 

Sorry u said u were worried about gears, i am more then 5

 

I've got about 5" of bumpstop and some pretty good sawzall and sledge hammer work up front to stuff em. The km2's weren't bad to fit, they measured like 33.5" true but these q78's measure a true 35. If you regear and go to 35s, I suggest 4.88s. I have 4.56's and fawkin hate it.

4.5" with 35" KM2's


4.5" with 36" TSL's


4.5" with Q78's. (Basically a 35" TSL)

 

I would be interested to see the same thing...except with the Bushwacker Flat Flares...setup I'm looking towards.

 

4" with 35s

 

Here is mine when I test fitted my 35s with my 4.5in lift. They would have rubbed if I had left them on even with my trimmed wheelwells.