So I wake up and head out to my jeep and i see my license plate on the ground and the bracket holding it on also on the ground. Yet another annoying setback this week But i was wondering how you guys have your plates on the front bumper? The bracket i had attached to the bottom of the bumper and i dont know where to find another one. Should i just drill new holes on the front?

 

throw it in the windshield...

 

Thats where it is now but im not sure if its legal in NJ

 

Junk Yard

 

I just used 2 small zip-ties and attached to the grill.

 

I made my own. On the bottom of the bumper in front of the flare. There were holes predrilled there and I bolted up a price of that angled steel with all the holes in it up to that. Then I cut 2 peices of copper pipe that was that were long enough to go almost flat with the front of the bumper then bolted it to the bottom of the plates. I don't have any pictures. But hopefully you'll be able to figure it out.

 

I started with a bracket I got from pepboys, and it broke so I just drilled 2 holes in the bumper and bolted it on with some self tapping screws.

 

X2