These shots are from the factory service manual on my 98. Even with that, there are still some bulbs, like those inside the dash and door switches, that are not listed. Maybe this helps you, as you'll have the standard bulb types to cross reference with the LED types.

 

I want to do this so bad...

 

ok thanks that helped a little. I think I might of figured almost everything out tonight. I found another thread that for the cluster bulbs they only changed out 5 bulbs. is that right? because mine has 5 larger bulbs but many other smaller ones.

 

bump

 

do i want 360 degree lights for the lights by your feet? or would 75 be better?

 

for my foot wells i ran some of the flexy LED's that connected to the dome so they were on the same switch. I think the strip had 9 or 12 bulbs in it and it looks really good. (I used red). For the dome i used 2 12 LED pads i found off ebay and cut off the old dome light connecter and wired them right in. I also ran another pad of 24 to directly over the back hatch area for more lighting. All for under 20 bucks and looks really nice and bright. It clearly shines red from the outside even with 80 percent tint.

 

Here ya go this might help ya out...it doesn't have all of the bulbs but most what you are looking for.

http://www.jeepforum.com/forum/f11/l...eeded-1155202/

 

Here is my thread on my interior lights that I got from SuperBrightLEDs. I only did the domes and footwells though...I have yet to do my map lights. Please keep us posted on what you go with!