cheap front lift?
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
Senior Member
Joined: May 2009
Posts: 728
Likes: 1
From: gig harbor, washington
Year: 1995
Model: Cherokee
Engine: 4.0 L
but its not bomb proof.
CF Veteran
Joined: Sep 2009
Posts: 4,145
Likes: 0
Who are you to say that building coil spacers himself is doing things the wrong way? I guess I shouldn't be a cheap a$$ and build my own bumpers and rockers.
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
thats on most any rig. Welding to the spring seats wouldn't be a bad idea...the do hold up the weight of the entire front end after all
Who are you to say that building coil spacers himself is doing things the wrong way? I guess I shouldn't be a cheap a$$ and build my own bumpers and rockers.
Who are you to say that building coil spacers himself is doing things the wrong way? I guess I shouldn't be a cheap a$$ and build my own bumpers and rockers.
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2009
Posts: 4,145
Likes: 0
But its just that, its YOUR opinion. Doesn't mean coil spacers are a bad idea or the WRONG way to lift a Jeep. Personally, I think that most aftermarket springs are way too stiff(explain why a RC 3" coil is only about 1/2" taller than a stock spring when both are standing next to each other on the ground) and the stock springs are nice and soft. Soft coils=softer ride so a coil spacer isn't a bad idea. Its the same concept with an ACOS system, except its not adjustable.
Junior Member
Joined: Feb 2010
Posts: 45
Likes: 0
From: blanchard,ok
Year: 1994
Model: Cherokee
Engine: 4.0
I just bought a set of 3 inch spacers off ebay I was also a little worried at first but my pocket book would not let me get a spring lift kit . I put it on and it looks great and perfourms great also and I flexed the crap out of my jeep several times with no problems.
Junior Member
Joined: Nov 2009
Posts: 85
Likes: 0
From: Hungary&Serbia
Year: 1997
Model: Grand Cherokee
Engine: 5.2
Could please someone post some pics ,just to get the idea,ive seen on you tube made out of pipe & rubber,could it be done out of pvc,the hard stuff,thanks in advance,its Grand Cherokee 97...v8,,5.2
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Senior Member
Joined: Mar 2011
Posts: 693
Likes: 0
From: Lexington Park, MD
Year: 2000
Model: Cherokee
Engine: 4.0L I6
CF Veteran
Joined: Nov 2011
Posts: 1,122
Likes: 0
From: Manchester, N.H.
Year: 1995
Model: Cherokee
Engine: 4.0 HO
**** just got real!
