Justinw

Last week i was driving doing about 20mph and my ring decided to chip half a tooth. I have a 94 xj 2 door 5 speed with the 8.25" 3.07 ring gear. I have been serching online trying to get a replacement ring and pinion kit i have only been able to find one for around $600 thats not including the diff. I am hoping that someone here can direct me to a less expensive part or a diff rear end with disc breaks that has the same lug pattern and gear ratio. Thanks for any help

OldTires

Try this site first:

http://car-part.com/

You'd be surprised how close parts are to you sometimes.

And when I have trouble finding parts, I call these guys in CA.

http://www.jwjeep.com/

A little pricey, but CA parts have no rust.

Good luck.

s346k

https://www.cherokeeforum.com/f71/da...3-07-a-221372/

possibly work something out with this guy.

Justinw

Thanks for the response i found a used ring and pinion this afternoon with 120000 miles im hoping they are correct ill have to check it when it comes in. All the places i contacted told me it is for a 5 speed only and is discontinued so used is the only way to go. If this dosnt work ill have to buy a whole rear end.

CherokeeHoonigan

I had that same exact jeep, mine was red. (off topic)