AW4 Trans swap
Does anyone know if 97 AW4 auto trans would work on a 94 AW4 4.0L XJ? The auto trans is slipping on my 94 xj so I went to the junk yard and the only one i found was a 97 AW4.
different computers are needed and even if you get the matching computer you have to tear into your wiring harness, and it might trigger a cel
don't waste this guys time and money by making stuff up
::CF Administrator::
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
I was gonna say whole different thing to put and 89 in a an older model then it is to put a newer one in an older model..I am with KTM here that 94 needs a 95 or older tranny to swap in. To bad he's not clsoer I have a good AW4 out of a 91 sitting in the garage collecting dust.
I was gonna say whole different thing to put and 89 in a an older model then it is to put a newer one in an older model..I am with KTM here that 94 needs a 95 or older tranny to swap in. To bad he's not clsoer I have a good AW4 out of a 91 sitting in the garage collecting dust.
91 to 96 are the same as the 87-90's except for having a 23 spline output
97-98's are compatible, not sure what they changed here all i know is they wont swap into other years.
in 99 they added a rear speed sensor which required a new computer system to run
Trending Topics
CF Veteran
Joined: Jun 2009
Posts: 5,383
Likes: 5
Year: 1988 limited
Model: Cherokee
Engine: 4.0 litre
CF Veteran
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
Sorry to bring up a old thread but why make a new one. I'm trying to put a 95 trans into a 97 xj I know it will bolt up and work but i know that I have to splice the wires for it to work. Are these wires color coded or does anyone know what wire goes where.
Thread
Thread Starter
Forum
Replies
Last Post
hogluvr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 16, 2015 08:15 AM
Mmll52
Modified XJ Cherokee Tech
6
Sep 2, 2015 10:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



