2000 xj locked, blocked, and stock gearing on 36's.
Alright well I did a little test video behind the shop. Nothing spectacular. I ain't no rock bouncer. I am very methodical about using the skinny pedal. But i will use it if I have to.
So just a warm up for Saturday.
Testing behind shop:
So just a warm up for Saturday.
Testing behind shop:
CF Veteran
Joined: Jul 2013
Posts: 7,554
Likes: 17
From: Monett, MO.
Year: 1999
Model: Cherokee
Engine: 4.0
Hell it looked good in that video to me that looks a lot like the areas that I wheel in where the forest trails have been washed out for years. I am not a big rock fan either as we have very few in this area so mine is really a trail rig.
Hills can be scary also.
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
you'll be fine. i ran 36x13.5 bias iroks on beadlocks aired down to 2psi on stock locked axles (297 joint hp30 and xj44 with 3.55 gears) perfectly fine for years. even drove 200 miles there and back all the time.
so have fun and post vids.
so have fun and post vids.
Some pix. Some great people we met up with on the trail. The 700 hp ultra 4 rig was simply awesome. We were able to make a climb that only a few rigs made all day. So they said we could hang with them. The ultra 4 guys was super cool. Always stopping to make sure we made it.




Last edited by holycaveman; Oct 18, 2014 at 06:46 PM.
Faired a little better here. We just watched a nice v8 wrangler stretched with tons and 38's beadlocks, etc.... fail. So i thought I would give it a try.
2000 xj.:
After I made it the wrangler had to attempt it again. He made it. It was pretty sweet, he was pumped. Couple of nice guys. I have the vids of them but forgot to beam them from my buddies phone.
2000 xj.:
After I made it the wrangler had to attempt it again. He made it. It was pretty sweet, he was pumped. Couple of nice guys. I have the vids of them but forgot to beam them from my buddies phone.





