how could i do a 1 in. drop out of 1x1 square tubing?

 

You mark the relation of the bolts to the tubing , drill the holes and mount them between the frame and the tc. Make sure the tubbing is a heavy enough gauge.

 

the stock bolts are long enough?

 

no u will need to get the stud/bolts out of the frame and use longer ones.

 

they screw right into the frame?

 

Yeah they both screw in and out but you will have a harder time removing the stud. Try a pipe wrench and some heat, the double nut method has never worked for me. if that doesnt work, use a big ez out and heat.

 

okie dokie where i get new studs from?

 

just stack washers. Does the same thing.

 

Don't replace the studs, get new longer bolts

 

Just drill out so round stock of aluminum.