x91j

ok so ive searched and searched and got some answers but not all.
i just picked up axle shafts from an xj with no abs. Now my zj has abs. if i just swap in the shafts without the abs tone rings what will happen? the abs light will be on and be disabled? should i just swap em in and forget about it or should i put them in and pull the abs fuse.

let me know

thanks in advance

xjmarc

When I did it on my ZJ I had to pull the fuses and relays or else the front brakes would pulse once I hit about 35 mph. The later model XJ shafts that have ABS use bigger u-joints and are a bit stronger than the ones you got and work with your ABS.

x91j

ya but i cant complain i got em for 50$ for both. plus i could careless if i have abs, it sucks on the trails

xjmarc

Then pull the relays and fuses and the annoying bulb in the dash. Or you can do what I did in my XJ and pull the entire ABS pump assembly and master cylinder out and replace it with a non ABS one.

x91j

lol ill stick with pulling the fuse and relay