I ordered a new "horn PA" setup thing, basically it runs with ground and positive then a control. It is not a "horn" that can be wired to the factory horn, its more of acessory like a CB. My two questions are:

How do I wire a positive to a fuse box?

and

How do I run wires through the fire wall and not through the door.

Thanks

 

if you look at the firewall from the engine bay you should see a gromet with some wires going thru it. if not then just drill a small hole and put a rubber gromet in the hole and pull your wires thru. the fuse box should have a few open slots for stuff like this and you just have to put the horns positive wire in it. also off topic but i dont live to far from you, im up in dubuque.

 

Oh cool. Where do I look for the place to wire the positive by one of the fuse boxes, preferably the one under the hood. And what kind of connection does it take?

 

just look for an open slot and i have no clue what kind of connection it takes.

 

I got a look at it and found it.. thanks. Now my other question is, the interior lights on top dont work. I checked the #5 fuse, changed it and it still didnt work. Any advice?

 

try looking under the hood at a fuse label "I.O.D." i think thats what its labeled or look for something like that. when mine didnt work that fuse blew.

 

i like using these fuse taps for powering items. http://4x4icon.com/crossfire/pioneer...s_fuse_tap.jpg
you can get them at any auto store.