Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

VIC and Radio issues

Old Nov 6, 2020 | 08:14 PM
  #1  
Tarriverarms's Avatar
Thread Starter
Newbie
 
Joined: Jun 2017
Posts: 26
Likes: 3
Model: Cherokee
Default VIC and Radio issues

95 GC Limited

Issue came with vehicle so not sure when or how issues came about.

The VIC does not work, replaced with another (came with vehicle) and it does not work either. Fuses are good. No idea how to trouble shoot the issue. Aware that issue could be another defective VIC; back to square one, how to troubleshoot?

The radio does not work. I can hear the antenna raise and lower when I turn It on or off. Nothing lights up on the display. CD player loads and ejects discs. No sound. Radio illuminates with dash lights. fuses good.

Anyone else have these issues?



Reply
Old Nov 7, 2020 | 05:52 AM
  #2  
Tarriverarms's Avatar
Thread Starter
Newbie
 
Joined: Jun 2017
Posts: 26
Likes: 3
Model: Cherokee
Default

So I pulled the radio, removed top cover and decided to run some resistance tests. I tested the following pins against the ground with the following results:
BAT - OL
ACC - 3.11
ILL - 6.92
PARK - OL
RF - 8.44
LF - 7.93
MUTE - 17.28

I’m really out of my element here with electronics but guessing the battery circuit is broken causing the radio not to play.
Reply
Old Nov 7, 2020 | 08:14 AM
  #3  
wingless's Avatar
Senior Member
 
Joined: May 2015
Posts: 818
Likes: 35
Year: 1994
Model: Grand Cherokee
Engine: 5.2L Magnum V8 220hp 285ft-lbs
Default

This reply shows the radio connector wiring. Measure the voltage on gray pin 6 + 7 to ground. Pin 7 should be 12VDC, pin 6 should be 12VDC when ignition is on.

The antenna up/down indicates black pin 1 is working.

This reply shows my attempt at VIC repair. It improved the issues, but I eventually swapped to an alternate eBay part.
Reply
Old Nov 8, 2020 | 04:26 PM
  #4  
2DrXJRegulatorFix's Avatar
Junior Member
 
Joined: Apr 2020
Posts: 77
Likes: 12
From: New York
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

When you resolder the VIC, you should add a little flux to each solder joint. When I redid mine, just remelting each joint wasn't enough for the larger joints. It took about 2 hours to go through all of them, but it works now. Try swapping the radio out with a known good radio. It'll narrow down whether it's the headunit or your speakers.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MyJeep2000
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
Jul 25, 2019 03:16 AM
Austin Coppedge
Aftermarket electrical systems
2
Oct 13, 2016 08:24 PM
XJRChad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Feb 24, 2014 08:28 PM
DDfammobile
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Apr 16, 2013 02:27 AM
mikeg216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Feb 22, 2010 06:25 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:41 PM.