Transmission control sensor (output)
#1
Newbie
Thread Starter
Join Date: Sep 2013
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Transmission control sensor (output)
So the diagnostic scanner puller the code for this. Can someone tell me where this sensor is located? Is there an input sensor as well?
Schematic would help me tremendously.
Schematic would help me tremendously.
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Thanks for your post.
We’re here to help but you must understand that all Jeeps are not the same.
In order for us to give you more accurate advice and help, we must know the following, along with detailed information as to the symptoms/problems etc:
Year
Model
Engine
Transmission
Also, the code NUMBER is very helpful......
We’re here to help but you must understand that all Jeeps are not the same.
In order for us to give you more accurate advice and help, we must know the following, along with detailed information as to the symptoms/problems etc:
Year
Model
Engine
Transmission
Also, the code NUMBER is very helpful......
Last edited by cruiser54; 11-06-2013 at 07:26 AM.
#3
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
It's right there above the muffler, it senses the bearings and the smog valve. Input sensor would be on the seat and it watch out for the deadly methane gases emitting fro the seat.
#4
Senior Member
Join Date: Jan 2012
Location: FL
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0L H.O Power Tech
Sensor or solenoid? The trans control solenoid is located inside the trans pan. I'm pretty sure the terms can be used interchangeably. One end of the solenoid is connected to the valve body, a middle part is mounted on the side of, and the third is plugged into a few different components towards the front of the pan.
#6
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#7
Senior Member
Join Date: Jan 2012
Location: FL
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0L H.O Power Tech
Trending Topics
#8
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
What matters is that the OP hasn't given any clarification and we're trying to figure this out based on little to no info......
#10
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#12
Senior Member
Join Date: Jan 2012
Location: FL
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0L H.O Power Tech
this I agree with. But after scrounging the JY for all sorts of these parts around and near the TCS I'm pretty comfortable with them. But some info would be great
#15
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 12 Likes
on
11 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
The guys in the Grand Cherokee forum will be able to help you then: https://www.cherokeeforum.com/f5/
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
10-18-2022 04:11 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)