Seal Question
#1
Newbie
Thread Starter
Join Date: Mar 2010
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0L
Seal Question
I swapped in a 242 transfer case and replaced all the seals. I drove it for a couple weeks local and today drove it out of town about 75 miles one way. I noticed transfer case fluid all over the underside of my jeep. It looks to be coming from the rear output shaft seal. What would cause this newly installed seal to fail? Stumped on this one.
Thanks,
-Gary
Thanks,
-Gary
#4
Newbie
Thread Starter
Join Date: Mar 2010
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0L
Thanks, I didn't have any issues with it leaking until I drove it on the interstate.
How can I see if the bearing is bad? Also, the rear output is flush with the transfer case. How could it be installed incorrectly?
How can I see if the bearing is bad? Also, the rear output is flush with the transfer case. How could it be installed incorrectly?
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
weswins
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-14-2015 10:09 AM
HappyTrails
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-11-2015 10:05 PM
canada_man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-04-2015 11:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)