Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

Problems need help

Old Mar 9, 2013 | 01:37 PM
  #1  
jeepcherokee99's Avatar
Thread Starter
Seasoned Member
 
Joined: Mar 2011
Posts: 275
Likes: 2
Year: 1999
Model: Grand Cherokee
Engine: 4.0
Default Problems need help

So I had my transmission rebuilt about three years ago. I just had my rear differential and transferase rebuilt about a year and a half ago. During that time I asked the mechanic to change the front differential fluid. He checked said it was good and left it alone. I trust this mechanic he has done a lot for me. I just noticed a rear seal on the transferase was leaking and took it in to get replaced.

Problems need help-image-2295832313.jpg

Now he tells me he hears grumbling and growling noises in the front diff.

What are causing all these problems? I baby this jeep. It's a 99 WJ LIMITED 4.0 with only 118k. I don't even have a hitch on it, it didn't come with the the tow package so it has never even towed a thing. I want to know what causes these problems so I can prevent them from happening if that's even possible I guess...

How long can I go without rebuilding the front diff? Can I just change the fluid more often and run it?
Reply
Old Mar 9, 2013 | 02:33 PM
  #2  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 740
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

The transfer case seal is a normal wear item. You can polish the sleeve of the driveshaft to help seal it. If there is a wear groove in it, you might consider replacing it. Every time you go over a bump, the sleeve slides in and out. When the rusted part slides into the seal, it helps tear it up.

Try pulling the front diff cover and inspecting the gears. Adding a friction modifier may help extend it's life.

Last edited by dave1123; Mar 9, 2013 at 02:38 PM.
Reply
Old Mar 9, 2013 | 03:00 PM
  #3  
jeepcherokee99's Avatar
Thread Starter
Seasoned Member
 
Joined: Mar 2011
Posts: 275
Likes: 2
Year: 1999
Model: Grand Cherokee
Engine: 4.0
Default

Originally Posted by dave1123
The transfer case seal is a normal wear item. You can polish the sleeve of the driveshaft to help seal it. If there is a wear groove in it, you might consider replacing it. Every time you go over a bump, the sleeve slides in and out. When the rusted part slides into the seal, it helps tear it up.

Try pulling the front diff cover and inspecting the gears. Adding a friction modifier may help extend it's life.
What's a friction modifier?
Reply
Old Mar 9, 2013 | 03:29 PM
  #4  
jnicewan's Avatar
Senior Member
 
Joined: Dec 2010
Posts: 698
Likes: 2
From: Norman, OK
Year: 95
Model: Grand Cherokee
Engine: 4.0
Default

Originally Posted by jeepcherokee99
What's a friction modifier?
Its the addititve you put in a limited slip differential. It basically makes the fluid "slicker" to allow limited slip clutches to slip and not bind. Adding something like this may not help at all but if anything it might prolong the life slightly.

Was the mech confident the noise was inside the diff? Could it possibly be from a wheel bearing, u-joint or driveshaft etc?
Reply
Old Mar 9, 2013 | 04:59 PM
  #5  
jeepcherokee99's Avatar
Thread Starter
Seasoned Member
 
Joined: Mar 2011
Posts: 275
Likes: 2
Year: 1999
Model: Grand Cherokee
Engine: 4.0
Default

Originally Posted by jnicewan

Its the addititve you put in a limited slip differential. It basically makes the fluid "slicker" to allow limited slip clutches to slip and not bind. Adding something like this may not help at all but if anything it might prolong the life slightly.

Was the mech confident the noise was inside the diff? Could it possibly be from a wheel bearing, u-joint or driveshaft etc?
Ya he was confident. I dnt have U joints. He already rebuilt my transmission, Transfercase, and rear diff. So how long can I go before fixing this? Will it cause damage to other things?
Reply
Old Mar 9, 2013 | 06:24 PM
  #6  
jnicewan's Avatar
Senior Member
 
Joined: Dec 2010
Posts: 698
Likes: 2
From: Norman, OK
Year: 95
Model: Grand Cherokee
Engine: 4.0
Default

It really depends on what is causing the noise. Most of anything inside a diff will eventually cause more damage the longer you wait and eventually it could cause complete destruction of the complete axle.

Im not trying to scare you into replacing anything now but without knowing specifically whats causing the noise it would be difficult to assume what might be wrong with it and how far it will make it. Some people get by with noises for years and others might only last days or weeks.
Reply
Old Mar 9, 2013 | 08:38 PM
  #7  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

New boat payments will make a mechanic's ears more sensitive and customer's vehicles in need of expensive repairs.
Reply
Old Mar 9, 2013 | 08:45 PM
  #8  
jeepcherokee99's Avatar
Thread Starter
Seasoned Member
 
Joined: Mar 2011
Posts: 275
Likes: 2
Year: 1999
Model: Grand Cherokee
Engine: 4.0
Default

Originally Posted by Bustedback
New boat payments will make a mechanic's ears more sensitive and customer's vehicles in need of expensive repairs.
Lol. I had the rear diff bad and I can hear the same noise in the front around 30-50 mph so I know it needs to get repaired eventually.
Reply
Old Mar 10, 2013 | 06:16 PM
  #9  
JBimmolate's Avatar
Member
 
Joined: Mar 2013
Posts: 197
Likes: 0
From: Nor Cal
Year: 1994
Model: Grand Cherokee
Engine: 4.0
Default

All the diffs with aluminum housings tend to get bad bearings due to the differences in expansion rates between the steel parts & aluminum parts. Also is your jeep AWD? If so running different brand or tires with different wear can cause the front diff to cook itself due to the 2 axles turning at different speeds. The smaller diff (front) will fail before the larger (rear) one.

Miles
Reply
Old Mar 13, 2013 | 02:44 PM
  #10  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 740
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

IMHO, pull the cover and eyeball it. Check for "silver" fluid caused by bearing deterioration, spauling on the gear teeth, backlash, whatever. My rear axle whined for 2 years before it started growling, then I knew it was finished.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
Mar 17, 2022 02:15 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
Oct 4, 2015 10:52 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 7, 2015 11:30 PM
cbowl
Cherokee Chat
1
Sep 4, 2015 01:56 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 3, 2015 09:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:42 PM.