Lift question for wj
Thread Starter
Member
Joined: Mar 2010
Posts: 164
Likes: 0
From: Greenville, South Carolina
Model: Cherokee
i am looking to buyin a wj and was wondering about lifting it.... i have been researching lifts for it for a while now and i have decided if i get a wj to go with the rough country 4 inch x series kit with all the goodies.... it claims after install i could run a 265/75 tire which is a 32'' tire... is it possible to put 2 inch coil spacers in with the 4inch lift coils to get 6 inches of lift or would that throw something off somewhere?? thanks. and i was also thinkin if u trimmed a tad 33's could be squeezed in there (285/75/16) thanks!!!
heres 4inch kit link
http://roughcountry.com/jeep_wj_4x.html
and heres coil spacer link
http://roughcountry.com/jeep_wj_2.html
its only 159.99 without the shocks.
heres 4inch kit link
http://roughcountry.com/jeep_wj_4x.html
and heres coil spacer link
http://roughcountry.com/jeep_wj_2.html
its only 159.99 without the shocks.
This rig needs a long list of upgrades to go from 4 to 6 inches of lift. Plus with the way contro arm spacing is done on the axle death wobble is much more common. Keep it at 4 tops unless your willing to go long arms.
Thread Starter
Member
Joined: Mar 2010
Posts: 164
Likes: 0
From: Greenville, South Carolina
Model: Cherokee
Trending Topics
Senior Member
Joined: Sep 2008
Posts: 772
Likes: 5
From: pa
Year: 2000
Model: Grand Cherokee
Engine: 4.0
Sure,if theres anything else you need to know just shoot me line. No particular reason that i sold,i loved it but i don't hang on to vehicles long...she was just one in a long line of jeeps!
Thread Starter
Member
Joined: Mar 2010
Posts: 164
Likes: 0
From: Greenville, South Carolina
Model: Cherokee
http://www.csloffroad.com/jeepwjlong...ft-iror65.aspx would this 6.5 inch kit be okay or would u likely get the death wobble? or have other major problems?
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



