Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

Front end popping noise?

Thread Tools
 
Search this Thread
 
Old May 3, 2010 | 10:59 PM
  #1  
Expensive_Hobbies's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 33
Likes: 0
From: Kansas City
Year: 99
Model: Grand Cherokee
Default Front end popping noise?

I just bought a 99 Grand Cherokee Laredo. Im new to these suspensions (I have had many old cars and more recently Camaros, but this stuff is all new to me). I have a problem I was hoping for a little help with. I have a really loud popping sound come from the front end (sounds like the driver side and it does not just do it while turning). It does it when i'm slowing down and theres a small squeaking noise as i'm driving at low speeds. It has a 4 inch lift with Rustys control arms and some Teraflex swaybar quick disconnects. What could this popping noise be coming from?

I have checked the tracbar and it has some play in it. Not sure if its supposed to or not. Also a cv shaft comes to mind, but it doesn't really make noise while turning. I have also checked the u-joints and they seem to be fine. Any other suggestions of things to check? Advice? Any help is greatly appreciated.
Reply
Old May 3, 2010 | 11:43 PM
  #2  
troy fritz's Avatar
CF Veteran
 
Joined: Jul 2009
Posts: 2,471
Likes: 2
Default

Check all your bushings. Sway links,sway bar,lca,uca ,shocks. also check for loose bolts. Your trac bar shoud not have any play. Good luck.And check the u-joints,all of them.As for the squeaking try greasing evrything [lube job].
Reply
Old May 3, 2010 | 11:48 PM
  #3  
Expensive_Hobbies's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 33
Likes: 0
From: Kansas City
Year: 99
Model: Grand Cherokee
Default

So the trac bar should have no play. It pivots up and down a little. What are they supposed to be torqued to?
Reply
Old May 3, 2010 | 11:54 PM
  #4  
troy fritz's Avatar
CF Veteran
 
Joined: Jul 2009
Posts: 2,471
Likes: 2
Default

Originally Posted by Expensive_Hobbies
So the trac bar should have no play. It pivots up and down a little. What are they supposed to be torqued to?
Trac bar ballstud nut is 62 and trac bar-to-axle bracket nut is 74 ft.lbs.
Reply
Old May 4, 2010 | 12:11 AM
  #5  
Expensive_Hobbies's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 33
Likes: 0
From: Kansas City
Year: 99
Model: Grand Cherokee
Default

Thanks, I guess i'm just gonna have to use the process of elimination method.
Reply
Old May 4, 2010 | 01:38 PM
  #6  
Expensive_Hobbies's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 33
Likes: 0
From: Kansas City
Year: 99
Model: Grand Cherokee
Default

Everything is tight, and I even replaced the u joints and greased the heck out of everything. I still have the same problem. It only does it when slowing and braking at low speeds.

Last edited by Expensive_Hobbies; May 5, 2010 at 12:33 AM.
Reply
Old May 4, 2010 | 11:40 PM
  #7  
troy fritz's Avatar
CF Veteran
 
Joined: Jul 2009
Posts: 2,471
Likes: 2
Default

Originally Posted by Expensive_Hobbies
Everything is tight, and I even replaced the u joints ang greased the heck out of everything. I still have the same problem. It only does it when slowing and braking at low speeds.
Did you check the calipers ,they might be loose.
Reply
Old May 4, 2010 | 11:43 PM
  #8  
Expensive_Hobbies's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 33
Likes: 0
From: Kansas City
Year: 99
Model: Grand Cherokee
Default

Yeah they are fine, I just put on new rotors and pads yesterday.
Reply
Old May 4, 2010 | 11:48 PM
  #9  
krash83's Avatar
Senior Member
 
Joined: Apr 2010
Posts: 530
Likes: 0
From: Saginaw, Mi
Year: 99
Model: Cherokee
Engine: 4.0
Default

Check motor mounts and trans mount. Do you have a t-case drop? Check the bolts on your trans cross member.
Reply
Old May 4, 2010 | 11:53 PM
  #10  
caged's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
Default

if you have cv front axle shafts, i'm thinking that's what it is.

but also very well could be wheel hub/unit bearings.
Reply
Old May 5, 2010 | 12:32 AM
  #11  
Expensive_Hobbies's Avatar
Thread Starter
Junior Member
 
Joined: May 2010
Posts: 33
Likes: 0
From: Kansas City
Year: 99
Model: Grand Cherokee
Default

Thanks for the help guys I will check into all that tomorrow. I'm not sure if the transfer case is dropped.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
98XJSPORTSATINJADED
Cherokee Chat
22
Jan 5, 2016 09:38 PM
Remington
Introductions
6
Sep 1, 2015 01:23 PM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 30, 2015 08:06 PM
prdgyair
Modified XJ Cherokee Tech
4
Aug 30, 2015 02:47 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Aug 23, 2015 07:12 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:57 PM.