Left turn signal inop

Subscribe
May 4, 2010 | 02:10 PM
  #1  
What are the possible causes of this? Hazards work fine. It is a 99 so it only has one flasher correct? Is it possible that it could be the flasher if the hazards and right turn signal still all work fine? I have a new switch from the previous owner but he told me he put it in and it did not fix the problem.
Reply 0
May 4, 2010 | 02:40 PM
  #2  
try pulling the bulb and cleaning out the socket,they can get pretty coroded
Reply 0
May 4, 2010 | 03:09 PM
  #3  
The hazards work fine (both sides), so im assuming its not a bulb.
Reply 0
May 4, 2010 | 03:14 PM
  #4  
does it have trailer wireing?sometimes a short in that can cause that,try just swapping bulbs around to,cuz I think nothing would work if the flasher was bad.
Reply 0
May 4, 2010 | 03:50 PM
  #5  
Yeah thats what i figured. I will look into that. Thanks.
Reply 0
May 5, 2010 | 12:36 AM
  #6  
Could it be in the cluster itself? Theres a bulb out in the cluster (on the speedo), so I pulled it out and put a new one and it still does not work. Im just wondering if the cluster could be causing this?
Reply 0
Subscribe
Currently Active Users (1)