change rear axel pinion seal
04-03-2012, 02:44 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Norway
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L I6
change rear axel pinion seal
Hi, has anybody tried to change the pinion seal as described in the Haynes manual? There it says, remove wheels and breake drums, disconnect drive shaft, rotate the yoke at lest ten times, then use a inch-pund torque wrench and measure and record the torque required to turn the pinion (not the nut?). This torque + five should be used to put the nut in place.
Thread
Thread Starter
Forum
Replies
Last Post
Jooman07
Modified XJ Cherokee Tech
25
08-28-2015 02:25 PM
AKghandi
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-28-2015 02:09 PM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)