Cannot adjust timing ?
#1
Newbie
Thread Starter
Join Date: Jan 2015
Location: Mojave Desert Calif.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Cherokee
Engine: 4.0
Cannot adjust timing ?
I have a 2004 G.C. that I just rebuilt the motor (4.0) and tranny (auto) on. I wanted to check the timing but ran into problems when I went to use my timing light. There are no spark plug wires for one thing.
I also read online that the timing cannot be adjusted ?
It runs fine but I noticed that once in awhile it "cough's " when I go to start it. Any help ?
I also read online that the timing cannot be adjusted ?
It runs fine but I noticed that once in awhile it "cough's " when I go to start it. Any help ?
#2
Old fart with a wrench
It seems you got the cam sensor base and pulse ring installed properly and that's all that matters. The PCM takes care of the rest. If it wasn't right, it wouldn't even start.
#4
Timing is not adjustable on any OBD1 or 2 Jeep. It is controlled by the PCM.
The PCM adjusts timing based on sensor input.
If you have a timing problem it's a result of a signal (or lack there of) from 1 or more sensors.
An OBD2 scanner is crucial to diagnosing the problem.
The PCM adjusts timing based on sensor input.
If you have a timing problem it's a result of a signal (or lack there of) from 1 or more sensors.
An OBD2 scanner is crucial to diagnosing the problem.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
JeepsAreForSpeed
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-04-2020 05:14 AM
Tommy Davis
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-30-2015 02:57 PM
IJM
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-21-2015 11:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)