Alittle help

Subscribe
Dec 24, 2009 | 10:04 AM
  #31  
but wouldnt a 3.5 4.5 be better for a daily dirver going across state ect?
Reply 0
Dec 24, 2009 | 01:32 PM
  #32  
it depends on tires size. my long arm kit rides and handles better then the stock suspension did. im only running 33s for now and it does great for a daily
Reply 0
Dec 24, 2009 | 02:03 PM
  #33  
Hmm okay.... would 33 be over kill on a 3.5?
Reply 0
Dec 24, 2009 | 02:34 PM
  #34  
no thats a good lift and tire combo. they look sweet with a 3.5 inch lift and 31s. im puttin 35s on mine.
Reply 0
Dec 25, 2009 | 05:37 PM
  #35  
you can always get a cheap air filter cone off ebay for 15 bucks,and get the intake tube from a 92ish cherokee,run a piece of 3" pipe from it to the cone.

homemade cold air intake for 30 bucks
Reply 0
Dec 26, 2009 | 02:27 AM
  #36  
with the 5.2 underhood clearance is very minimal, my k&n is only a couple of inches tall at the top and it rubs
Reply 0
Dec 26, 2009 | 09:27 AM
  #37  
found 2inch budget lift 50 bucks? waste of money or no?
Reply 0
Dec 26, 2009 | 10:16 AM
  #38  
get it you can always use it later when you get a bigger lift
Reply 0
Dec 26, 2009 | 02:39 PM
  #39  
get it, ive had a 2in bb since august even though im ready to go bigger
Reply 0
Dec 26, 2009 | 05:47 PM
  #40  
why do a cai when you can get 10 ft of pvc and make a nasty snorkle , thats what i did with my zj it came out awsome.
Reply 0
Dec 26, 2009 | 09:19 PM
  #41  
Quote: why do a cai when you can get 10 ft of pvc and make a nasty snorkle , thats what i did with my zj it came out awsome.
where did you put your air filter?
Reply 0
Dec 27, 2009 | 12:18 AM
  #42  
here are some pictures of a guys rig to give you an idea of how stuff would look, and yes he did trim his fenders.

2.5" and 32's



3.5-4" and 32's



5" and 33's



5.5" and 35's

Reply 0
Dec 27, 2009 | 07:22 AM
  #43  
Quote: where did you put your air filter?

i got the stock air box from a hyundia, and put it in the middle of the pvc and cement sealed the whole deal, then i put a second cone filter on the end of the pipe sort of like a pre filter
Reply 0
Subscribe
Currently Active Users (1)