95 4.0 gc, i checked to see if the blend doors were moving and the levers going into the two vacuum solenoids under the dash are moving back and forth when i turn the switch to different modes. its not redirecting air out of any of the vents, foot defrost or front vents, blower motor of course is working its just not directing air? any ideas?
CF Veteran
You may have a broken mode door. If the vacuum motors are moving and there is in fact a vacuum signal to the motors, a busted door would be the only thing it could be.
well i been playing with the switch lately and now noticed air coming out from the middle vents, if i take the instrument cluster out can i get access to the door and see if there's something jammed in there? or any other access points before ripping the dash out?