97 Laredo cranks, no gauges, can't read codes
#1
Newbie
Thread Starter
Join Date: Nov 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
97 Laredo cranks, no gauges, can't read codes
This morning my 97 Laredo 4.0 would turn over but, not start. Then I noticed none of the gauges were working, didn't hear the fuel. Connected my OBDII scanner but, it can't communicate/read any codes. Lights work, radio works, all other electrical seems okay. Any suggestions, recommendations?
#2
This morning my 97 Laredo 4.0 would turn over but, not start. Then I noticed none of the gauges were working, didn't hear the fuel. Connected my OBDII scanner but, it can't communicate/read any codes. Lights work, radio works, all other electrical seems okay. Any suggestions, recommendations?
#4
Old fart with a wrench
Possible ignition switch failure. Sounds like you're getting the accesories but not the ignition circuits.
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
frantic29
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-26-2015 04:30 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Montana5991
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-02-2015 09:23 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)