96 zj rear diff cover?
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0
96 zj rear diff cover?
I have a bit of a issue I just bought this beautiful 96 zj grand Cherokee... I did some normal maintence like oil tranny fluid transfer case oil plugs and other stuff.... I noticed after driving it the rear end cover was leaking and this is what it looked like (hell)
So I cleaned it and there's a pinhole in the cover... I called and am having trouble finding a cover gasket and 10 bolts.... Can anyone point me in the right place? Also one place told me it could be one of 2 covers and there's no tag on any bolts so another way I can recognize if it's a Dana or not???
It's a 4.0
Thanks guys I need this done b4 snow fall
So I cleaned it and there's a pinhole in the cover... I called and am having trouble finding a cover gasket and 10 bolts.... Can anyone point me in the right place? Also one place told me it could be one of 2 covers and there's no tag on any bolts so another way I can recognize if it's a Dana or not???
It's a 4.0
Thanks guys I need this done b4 snow fall
#2
Senior Member
Join Date: Dec 2010
Location: Norman, OK
Posts: 698
Likes: 0
Received 2 Likes
on
2 Posts
Year: 95
Model: Grand Cherokee
Engine: 4.0
You have the dana 35. Dont waste your time looking for the gasket, most people dont use them and most diffs dont have them anymore. I would just use some decent silicone and run a small bead around the cover and slap it on. I recommend an "ultra" type silicone in grey or black color.
#3
Member
Join Date: Oct 2011
Location: Indianapolis Indiana
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 5.2
If it was me I'd take it off, clean it up real good, weld in the holes, paint it black, and used RTV black to seal it up and reinstll it. good to go.
By the way your avatar is too cool..
By the way your avatar is too cool..
#6
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0
Ok thanks for that a Dana 35.... This baby has 195k and the cover is in so bad shape!!! I just don't want to go to the dealer and pay 125.00 for a cover..... I've tried levines napa autozone advanced and nothing.....
Ok another question I've read about needing additive if it's a posi? Anyone know the name off hand?
Ok another question I've read about needing additive if it's a posi? Anyone know the name off hand?
Trending Topics
#11
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0
#15
Member
Join Date: Oct 2011
Location: Indianapolis Indiana
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 5.2
just courious, I've never seen a cover leak like yours has.. has it been hit with something??? or dented so it rubs the gears. >>> ??? just wondering..