I do not see a high beam indicator on the dash.
I can turn the high beams on and off but no indication on the dash!
NE1 no why or how to fix it?

 

it's a ZJ, and you just remove the bezel screws and then 4 small bolts that hold the instrument cluster in, change bulb and reverse order to install

 

wow...stupid rookie mistake(zj)...thanks for the fast response bro...is it a 194 bulb in there?

 

I believe so, but it may be the smaller 124with the built in socket holder

 

I do not know where the indicator is...can someone upload a pic of the dash bulb sockets in this dash? I do not have the service manual yet.

 

shine a flash light on the cluster and you will see where it is, top dead center of the cluster

 

Thanks again willys55..will try that and see this weekend

 

Ok...I removed at least 27 screws on the dash to get at the bezel but it is still there...I removed the negative cable because of the air bag etc!...this is not a quick fix on a GC limited 1993...I see the 2 screws on the bottom of the bezel but you can not pry the clips as there are no clips! I am confused...I got to the point where the dash pad had to be removed to get at the screws and stopped...I have now reinstalled all the screws and trim so I can drive the truck...any ideas as to where I went wrong Willys55?

 

The 93-95 ZJ dash is a nightmare to disassemble, lots of hidden screws that you won't find until it's too late.