2000 WJ 4.0 Issue today
#1
Newbie
Thread Starter
Join Date: Mar 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
2000 WJ 4.0 Issue today
Driving home from work I got a CEL. Car drove fine and I got home with it. I got my OBDII scanner out to check the codes. I received the following codes: Current Fault P0340 (Camshaft Position Sensor "A" Circuit, Pending Fault P1391, and Pending P0306. I screenshotted the results of the faults and then tried to start the truck. It cranks with gusto but no start. So I figure maybe I needed to clear the codes and try again. I cleared the codes, still no start. Now the truck just cranks strong but no fire up. Anyone know what this is? Should I change the Cam Position Sensor or crank sensor?
#2
CF Veteran
Crankshaft Position Sensor is the more likely culprit despite the fault code indication. Do yourself a favor and use OEM components. Luckily, prices for these are relatively low.
Thread
Thread Starter
Forum
Replies
Last Post
BimmerJeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
42
02-25-2019 03:30 PM
GS Audio
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
04-14-2011 07:42 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)