THE Start of THE DIESEASE
Thread Starter
Member
Joined: Oct 2011
Posts: 113
Likes: 0
Model: Cherokee
THE Start of THE DIESEASE
So im new to the jeep world and love it. I picked u this 1996 cherokee sport, for really cheap $350 buck!!!!!!!. She needs some love but will make a great wheeling rig ( wont care about dents and scratches).
She runs great for the most part, Needs some love but thats ok for $350 bucks
1996 cherokee
5 speed
4.0 engine
216,000 Miles
Clean Interior,
Body is decent
UNDERCARRIGE HAS SOME ROTTTTTTT
I use the jeep as a daily driver right now and she runs great, does not use any fluids and pulls strong! ( minus exhause leak, clutch issiue, Blown suspension all the way around, and some rusty break lines)
My plans are to cut the fenders, Make some steel Bumpers, Give her a tune up, Lift her 4.5 inches and slap some 33s or mabe 35s on her and WHEEL her Hard
She runs great for the most part, Needs some love but thats ok for $350 bucks
1996 cherokee
5 speed
4.0 engine
216,000 Miles
Clean Interior,
Body is decent
UNDERCARRIGE HAS SOME ROTTTTTTT
I use the jeep as a daily driver right now and she runs great, does not use any fluids and pulls strong! ( minus exhause leak, clutch issiue, Blown suspension all the way around, and some rusty break lines)
My plans are to cut the fenders, Make some steel Bumpers, Give her a tune up, Lift her 4.5 inches and slap some 33s or mabe 35s on her and WHEEL her Hard
Thread Starter
Member
Joined: Oct 2011
Posts: 113
Likes: 0
Model: Cherokee
Rough Country
So i just got my Lift kit in the mail (Thank you UPS) I went with a 4.5 inch Rough country, I went with new Leaf packs in the rear due to sagging old springs, I am awaiting some new parts before i strart the lift ( new front & rear swaybar bushigs, rear leaf shackels and upper control are bushings) I dont want to disable the jeep for to long so i will wait untill i get all parts before the Install. Any other parts you can think of replacing while im under there?
Pics will come tomorro after i open the boxes
Pics will come tomorro after i open the boxes
Thread Starter
Member
Joined: Oct 2011
Posts: 113
Likes: 0
Model: Cherokee
Well today I did a few things t the jeep. I took off Bumper End caps, Replaced the Clutch Master Cylinder, Removed Fender Flares ( getting ready to cut fenders) And Cust the rear quarter panels at the pinch weld..
I will upload some pics soon, there on my i-phone
I will upload some pics soon, there on my i-phone
Trending Topics
Thread Starter
Member
Joined: Oct 2011
Posts: 113
Likes: 0
Model: Cherokee
Ok Well i got all The bolts out of the rear leafs and shackles, Lots off gringing and cutting, but there out! Wainting on shackles and i have to go to hardware store to get some grade 8 bolts and install rear leafs. Now i have to get some brake parts ( drums, shoes, hardware, and e brake cables, ) then i can DRIVE HER. sweeet
Thread
Thread Starter
Forum
Replies
Last Post
frantic29
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
Sep 26, 2015 04:30 PM
Ashs1714
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 4, 2015 10:14 PM
north0house
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Aug 31, 2015 09:08 PM
03cheroke
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Aug 27, 2015 06:07 AM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Aug 25, 2015 11:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)