Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

won't recognize power until hooked to jump pack?

Old 08-26-2015, 05:47 PM
  #1  
Newbie
Thread Starter
 
03cheroke's Avatar
 
Join Date: Aug 2015
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Angry won't recognize power until hooked to jump pack?

2003 grand cherokee, 4.0L 6cyl. Battery is good, alternator is good, starter is good, etc...

when we take a short trip to the store, we will come out and it will not crank, will not click, nothing, no gauges, no lights... neighbor brings over his jump pack, hooks it up, and it starts right up. We even tried jumper cables before that and it wouldn't do anything. We let it run for 10 seconds, turn it off. With the jump pack disconnected, it starts right up immediately. So not the battery or alternator right??

When we hook the jump pack up, and put the key in the ignition for the first time, the gauges go crazy for a second, but it starts right up.

Is this some kind of module, regulator, or electronic problem that is causing this? It has happend multiple times now over the past few months... we even left it like this at home for a week while we were out of town, came back, tried to start it again, nothing happened (like when before we left), checked the battery voltage (12.2v), hooked up the neighbors jump pack, and it started right up - the odd thing is the ECU cleared the check engine light that was saved because it thought the battery was dead, but it wasn't ? (The CEL is for a rear o2 sensor)

Anyone have any idea what we can check next on this? Not the battery, alternator, starter, or any of that. Some type of electrical or connection issue? Any advice is greatly appreciated!!

Last edited by 03cheroke; 08-26-2015 at 06:02 PM.
Old 08-26-2015, 08:03 PM
  #2  
CF Veteran
 
Bustedback's Avatar
 
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes on 18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

Try cleaning the battery terminals before spending any money on parts.
Old 08-27-2015, 06:07 AM
  #3  
Old fart with a wrench
 
dave1123's Avatar
 
Join Date: Nov 2010
Location: Manlius, east of Syracuse, NY
Posts: 14,398
Received 723 Likes on 628 Posts
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

If that doesn't solve the problem, try replacing the battery cable ends. I had one corroded inside the molded lead part of the end.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
Hawley12
Modified XJ Cherokee Tech
4
09-04-2015 02:34 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: won't recognize power until hooked to jump pack?



All times are GMT -5. The time now is 07:23 PM.