Banned
Quote:
there is no reason for needing dual stabilizers...the vibe is prolly improper balancing go to town fair tire and have them order you Equal in the proper bag size for 35's rob runs equal and loves it i cant run it cause they dont make it for 32's...Originally Posted by clayton3854
haha right bro! took me long enough. took her out on a little voyage in south hampton after gettin em put on my rims. def gonna get a duel stabalizer as i get vibrations between 35-40. also def need the spare axle shafts now from steve.. while finding myself a set of chromolys.
Quote:
lol they dont make it for 32s? i has equalizer in my coopers that are 32s. town fair used it... thats what i was planning on doing was just equalizer but few ppl told me i should be running duel stabalizer with tires this big. which makes senseOriginally Posted by mcguyver_xj
there is no reason for needing dual stabilizers...the vibe is prolly improper balancing go to town fair tire and have them order you Equal in the proper bag size for 35's rob runs equal and loves it i cant run it cause they dont make it for 32's...
Banned
Quote:
well they prolly didnt throw a whole 33" bag in...and whomever told you you should be running dual stabilizers needs some more time researching cuse if your steering suspension is at 100% you don't even need a stabilizer theres lots of guys even on here with hd steering and no stabilizersOriginally Posted by clayton3854
lol they dont make it for 32s? i has equalizer in my coopers that are 32s. town fair used it... thats what i was planning on doing was just equalizer but few ppl told me i should be running duel stabalizer with tires this big. which makes sense
Senior Member
Quote:
This is the final outcome of using a spare jeep wrangler rear tire carrier stock mount
but too get to this outcome you need to drill holes in two extra stock roof rails got em for 10 bucks at a JY. yakima racks are pretty thick bars so we had too cut the middle bars with a sawzaw and slightly bend them so we could slide the tire mount underneth so it would mount too the roof rails sturdy. as you can see here
we caulked the ends so water wont get in. we were gonna weld em back together but figured if i ever wanna change this setup that would mean id havta cut up the roof rails. didnt wanna do that. here is tire all mounted up.
Also like i said we mounted my rustys gas tank skid and my rear bumper made my Nates4x4. it was a pain in the *** to get everything to line up, we used a floor jack because the skid is so heavy and it scratched the crap outta my paint job on the skid plate.. oh well was bound to happen anyways. heres a pic
anyways in the end i ended up using a new tail pipe mount so my tail pipe would mount straight. the PO mounted it crooked so it rubbed against my leafs and made a loud annoying squeaking sound everytime i hit a slight bump. but after using a heavy duty pry bar we got everything all lined up and mounted.
Awesome build man. Your jeep inspires me. I know it was awhile ago but I have the same tailpipe problem. What's an easy way to remount it?Originally Posted by clayton3854
ok so i have quite a few updates for everyone. finally located a spare 33" A/T and all the parts needed too mount it to my roof rack. also got all the hardware and new nut strips to mount my Nates4x4 rear bumper and Rustys gas tank skid. got a few pics in of the process of mounting the spare. (same way i did with my last jeep)This is the final outcome of using a spare jeep wrangler rear tire carrier stock mount
but too get to this outcome you need to drill holes in two extra stock roof rails got em for 10 bucks at a JY. yakima racks are pretty thick bars so we had too cut the middle bars with a sawzaw and slightly bend them so we could slide the tire mount underneth so it would mount too the roof rails sturdy. as you can see here
we caulked the ends so water wont get in. we were gonna weld em back together but figured if i ever wanna change this setup that would mean id havta cut up the roof rails. didnt wanna do that. here is tire all mounted up.
Also like i said we mounted my rustys gas tank skid and my rear bumper made my Nates4x4. it was a pain in the *** to get everything to line up, we used a floor jack because the skid is so heavy and it scratched the crap outta my paint job on the skid plate.. oh well was bound to happen anyways. heres a pic
anyways in the end i ended up using a new tail pipe mount so my tail pipe would mount straight. the PO mounted it crooked so it rubbed against my leafs and made a loud annoying squeaking sound everytime i hit a slight bump. but after using a heavy duty pry bar we got everything all lined up and mounted.
Quote:
shouldny be hard my man, your exsisting tailpipe mount i shall assume is either bent/hanging or something of the sorts otherwise you wouldnt rly run into a problem with it. what your gonna havta do is cut the previous omunting bracket off the tailpipe unless you can remove it an easier way.. now your tailpipe should be basically freely hanging in the back you should be able to move it up high enough where you can get the skid n tie in brackets lined up n started then just let the tailpipe free and tighten the bolts in for the skid. then just mount a new bracket on. if this doesnt make sense take me a pic of your current setup back there and ill try dictating it to you from your picture or i can post a pic of my final outcome. just lmk.Originally Posted by just_jeepin
Awesome build man. Your jeep inspires me. I know it was awhile ago but I have the same tailpipe problem. What's an easy way to remount it?
Quote:
iv heard both sides of the story and see benifits to both sides of the story. although i agree if its 100% perfect you dont need one.. but lets be real.. iv never seen someone with 100% perfect steering on a jeep. either way i still have slight vibrations coming from the front end.. got the equal put in today n tires are def better but like i said still getting a vib up front.Originally Posted by mcguyver_xj
well they prolly didnt throw a whole 33" bag in...and whomever told you you should be running dual stabilizers needs some more time researching cuse if your steering suspension is at 100% you don't even need a stabilizer theres lots of guys even on here with hd steering and no stabilizers
Senior Member
Quote:
shouldny be hard my man, your exsisting tailpipe mount i shall assume is either bent/hanging or something of the sorts otherwise you wouldnt rly run into a problem with it. what your gonna havta do is cut the previous omunting bracket off the tailpipe unless you can remove it an easier way.. now your tailpipe should be basically freely hanging in the back you should be able to move it up high enough where you can get the skid n tie in brackets lined up n started then just let the tailpipe free and tighten the bolts in for the skid. then just mount a new bracket on. if this doesnt make sense take me a pic of your current setup back there and ill try dictating it to you from your picture or i can post a pic of my final outcome. just lmk.
I gotcha, I'm so tired of that noise everytime I accelerate. Thanks for the help man!Originally Posted by clayton3854
shouldny be hard my man, your exsisting tailpipe mount i shall assume is either bent/hanging or something of the sorts otherwise you wouldnt rly run into a problem with it. what your gonna havta do is cut the previous omunting bracket off the tailpipe unless you can remove it an easier way.. now your tailpipe should be basically freely hanging in the back you should be able to move it up high enough where you can get the skid n tie in brackets lined up n started then just let the tailpipe free and tighten the bolts in for the skid. then just mount a new bracket on. if this doesnt make sense take me a pic of your current setup back there and ill try dictating it to you from your picture or i can post a pic of my final outcome. just lmk.
Quote:
np bro lemme know if you run into any issues and i learned when installing my skid and bumper with tie in brackets and a pry bar is your best effin friend.Originally Posted by just_jeepin
I gotcha, I'm so tired of that noise everytime I accelerate. Thanks for the help man!
so went down to my local 4x4 shop to visit my buddy stealthcherokee and we decided to play on the RTI ramp a little with my xj now that im rocking 35s, enjoy:
finally a picture of how stuffed my rear tire is... keep in mind 35"
and finally we have a picture of my jeep parked next to a stocker and them me parked next to stealthcherokee.
finally a picture of how stuffed my rear tire is... keep in mind 35"
and finally we have a picture of my jeep parked next to a stocker and them me parked next to stealthcherokee.
Seasoned Member
just wait till i got the new suspension goodies on ill sit at your hight but on 33s 
... but i just looked at my tracking info and for the first time its going to take more then for days i got to wait till monday to get to my house
... but i just looked at my tracking info and for the first time its going to take more then for days i got to wait till monday to get to my house
Senior Member
Quote:
always have my 3 foot bar handy when workin on the jeep. Originally Posted by clayton3854
np bro lemme know if you run into any issues and i learned when installing my skid and bumper with tie in brackets and a pry bar is your best effin friend.
Quote:
haha very smart man.Originally Posted by just_jeepin
always have my 3 foot bar handy when workin on the jeep.
Quote:
... but i just looked at my tracking info and for the first time its going to take more then for days i got to wait till monday to get to my house
yea my jeep likes to sagg no matter what size lift or how new it is.. RC products for you. i shoulda just gone IRO or clayton or rock krawler.Originally Posted by stealthcherokee
just wait till i got the new suspension goodies on ill sit at your hight but on 33s ... but i just looked at my tracking info and for the first time its going to take more then for days i got to wait till monday to get to my house