Project snowball
#1
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Richland Center, WI
Posts: 504
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Project snowball
Well a little about my xj would be a good way to start this.
Suspension
6.5" Clayton leafs and coils. Rough country shackle relocation brackets. Serious off road longarms.
Steering
Serious off road otk 1 ton kit. Stock steering box drilled and tapped for hydro assist.
Axles
Dana 30 mildly built. 4.56 gears and a lunchbox locker. Rear is an 8.8 with upgraded clutch packs and a heavier spring.
Miscellaneous
Tube doors and hooligan offroad fenders.
Suspension
6.5" Clayton leafs and coils. Rough country shackle relocation brackets. Serious off road longarms.
Steering
Serious off road otk 1 ton kit. Stock steering box drilled and tapped for hydro assist.
Axles
Dana 30 mildly built. 4.56 gears and a lunchbox locker. Rear is an 8.8 with upgraded clutch packs and a heavier spring.
Miscellaneous
Tube doors and hooligan offroad fenders.
The following users liked this post:
ijeeep (04-23-2024)
Trending Topics
#11
CF Veteran
Join Date: Nov 2011
Location: City of Trees, CA
Posts: 7,387
Likes: 0
Received 10 Likes
on
9 Posts
Year: 93 2 door
Model: Cherokee
Engine: 4.0
I think you put about double the amount of tube you needed inside the halo. nice work regardless!
you should ask a mod to move this to the fabrication section
you should ask a mod to move this to the fabrication section
#13
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Richland Center, WI
Posts: 504
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Thanks guys much appreciated. I'll try to get some more pictures of the finishing touches as they come. For now I'll leave a teaser of what's next.