Figured I should start a build thread for my xj so here it goes.

I have a maroon 2000 jeep Cherokee 4x4. It already has a 4.5 rough country lift and I'm running on 33x12.50s. I also have 4.10 gears. For protection I have front winch bumper with a winch and a rear bumper. 6 pro comp lights, tire rack on my roof with a shovel and a high lift.

What I plan on doing is installing a 8-9in lift either long arm or 4 link kit, running Dana 60s front and rear, probably 4.88 gears, 37in tires, bead locked rims, chopping the top, exo cage, rock sliders, onboard air, inverter, maybe a onboard welder for small trail repairs and hydro assist steering

 

Got the back cut today. I'll be starting to fit everything up shortly.

 

Placed some tape on the sides to insure even lines.



Cut the door down till it fit and placed it in the back for a test fit



Side view



Cut the plate down to size and placed that in the back



Tacked everything up



Another side view



Bed caps that we made

 

pretty clean work on that chop top so far. are you gonna be able to clean up the edge where the body meets the rear hatch where it doesn't line up quite right? sounds like an ambitious build

 

Ya I'm going to do some sheet metal work so it looks like the hatch is wider then it actually is.

 

Started on my tail light housings

 

Got both tail light housings fabricated up. I'll cut holes this weekend and put some LEDs in there



Got the driver side bed cap welded up



Got the passenger side bed cap welded up



Driver side wheel well cap partly welded



Passenger wheel well cap partly welded

 

Driver and passenger side plates cut and ready to be welded hopefully do that this weekend.

 

Lookin good, I can't stand it when people chop their Jeep and don't finish it off at all, leaving all the cut edges n stuff, it looks like crap. You are finishing it off better than anything ive personally ever seen..looks like a chopped Jeep i'll end up liking! Keep it up

 

Looks good man

 

Thanks ya i like to drive stuff that looks good I don't wanna be cruising around in a piece.

 

Thanks it's getting there lol

 

subbed. real nice work so far!

 

Thanks. I'll be posting up some more pics tonight or in the morning if I don't tonight

 

Can't wait to see the end result here, looks awesome so far.