3 Attachment(s)
Figured I should start a build thread for my xj so here it goes.
I have a maroon 2000 jeep Cherokee 4x4. It already has a 4.5 rough country lift and I'm running on 33x12.50s. I also have 4.10 gears. For protection I have front winch bumper with a winch and a rear bumper. 6 pro comp lights, tire rack on my roof with a shovel and a high lift. What I plan on doing is installing a 8-9in lift either long arm or 4 link kit, running Dana 60s front and rear, probably 4.88 gears, 37in tires, bead locked rims, chopping the top, exo cage, rock sliders, onboard air, inverter, maybe a onboard welder for small trail repairs and hydro assist steering Attachment 185624 Attachment 185625 Attachment 185626 |
2 Attachment(s)
Got the back cut today. I'll be starting to fit everything up shortly.
Attachment 186707 Attachment 186709 |
7 Attachment(s)
Attachment 187243
Placed some tape on the sides to insure even lines. Attachment 187244 Cut the door down till it fit and placed it in the back for a test fit Attachment 187245 Side view Attachment 187246 Cut the plate down to size and placed that in the back Attachment 187247 Tacked everything up Attachment 187248 Another side view Attachment 187249 Bed caps that we made |
pretty clean work on that chop top so far. are you gonna be able to clean up the edge where the body meets the rear hatch where it doesn't line up quite right? sounds like an ambitious build
|
Originally Posted by Atmos
(Post 2420746)
pretty clean work on that chop top so far. are you gonna be able to clean up the edge where the body meets the rear hatch where it doesn't line up quite right? sounds like an ambitious build
|
1 Attachment(s)
|
5 Attachment(s)
Attachment 187648
Got both tail light housings fabricated up. I'll cut holes this weekend and put some LEDs in there Attachment 187649 Got the driver side bed cap welded up Attachment 187652 Got the passenger side bed cap welded up Attachment 187650 Driver side wheel well cap partly welded Attachment 187651 Passenger wheel well cap partly welded |
1 Attachment(s)
Attachment 187653
Driver and passenger side plates cut and ready to be welded hopefully do that this weekend. |
Lookin good, I can't stand it when people chop their Jeep and don't finish it off at all, leaving all the cut edges n stuff, it looks like crap. You are finishing it off better than anything ive personally ever seen..looks like a chopped Jeep i'll end up liking! Keep it up
|
Looks good man
|
Originally Posted by dpace7XJ
(Post 2424466)
Lookin good, I can't stand it when people chop their Jeep and don't finish it off at all, leaving all the cut edges n stuff, it looks like crap. You are finishing it off better than anything ive personally ever seen..looks like a chopped Jeep i'll end up liking! Keep it up
|
Originally Posted by Xj moo
(Post 2424493)
Looks good man
|
subbed. real nice work so far!
|
Originally Posted by stock95sport(for now)
(Post 2424956)
subbed. real nice work so far!
|
Can't wait to see the end result here, looks awesome so far.
|
All times are GMT -5. The time now is 08:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands