Project Lumbago
#1
Newbie
Thread Starter
Join Date: Dec 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee (XJ)
Engine: 4 l HO
Project Lumbago
Hi guys!
I finally got myself my very first Jeep. Only driven it a couple of days but I'm truly sold on this car! Drives great although there are a couple of issues. It's a 95 with 230000 km so it should have issues right?!
Here it is in my garage space I share with some friends.
Plan is to build bumpers, ad a winch, lift it and so on but first I had to solve an issue. Mr Lumbago (or is it Mrs?) sometimes refuses to start when warm.
The web points its finger at either the ignition coil or the crank position sensor so I bought both (yup, throwing parts at the problem!).
Found the codes and that said "Cam Angle Sensor" which is a sensor Mr (Mrs) Lumbago doesn't have...
I then ripped out the half dead alarm system.
The install of this system was a work of art performed by someone with all letter combinations probably on the run from an institution somewhere north! What a nest!
After the debris cleared Lumbago started right up! Can't wait to start moddin, fabricating and what not!
Back as soon as I have some news.
Cheers!
Patrik
I finally got myself my very first Jeep. Only driven it a couple of days but I'm truly sold on this car! Drives great although there are a couple of issues. It's a 95 with 230000 km so it should have issues right?!
Here it is in my garage space I share with some friends.
Plan is to build bumpers, ad a winch, lift it and so on but first I had to solve an issue. Mr Lumbago (or is it Mrs?) sometimes refuses to start when warm.
The web points its finger at either the ignition coil or the crank position sensor so I bought both (yup, throwing parts at the problem!).
Found the codes and that said "Cam Angle Sensor" which is a sensor Mr (Mrs) Lumbago doesn't have...
I then ripped out the half dead alarm system.
The install of this system was a work of art performed by someone with all letter combinations probably on the run from an institution somewhere north! What a nest!
After the debris cleared Lumbago started right up! Can't wait to start moddin, fabricating and what not!
Back as soon as I have some news.
Cheers!
Patrik
Last edited by Sodster; 01-12-2016 at 03:04 PM.
Thread
Thread Starter
Forum
Replies
Last Post
70hemicuda
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
12-23-2015 08:33 PM
MayerMR
Modified XJ Cherokee Tech
7
12-22-2015 07:19 PM
judbgrdmchn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
12-22-2015 03:26 PM
Gambit
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
12-21-2015 03:40 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)