When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
not much to update, it's been too damn cold to work on anything.
We got some decent snow here yesterday though (6-7" in just over 8 hours). I'm so glad i put the front driveshaft back in last week...the roads were absolutely awful
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
Picked up a purchase for the XJ - plans are changing a bit. I was going to convert my a/c compressor for on-board air this spring, but couldn't pass this up.
Vlair 480c Compressor
150/110 psi solenoid
Gauge
2.5 gal tank
I'm debating remounting it to a board like it is now, or a permanent install. I think i may go permanent eventually so i can use it for air horns and lockers in the future as well.
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
everything is on hold until after my Professional Engineering licensure test is complete (middle of April).
Short term plans in the works for Spring:\
Doorless mod (front doors) (with soft doors?)
Monstaline the interior [have kit]
TC Linkage mod [have parts]
Exhaust Manifold Replacement and tailpipe repair [have parts]
Finish replacing rear drum brake pads and piston [have parts]
2x6 Rocker Replacement Sliders
Replace H.P. Steering line and install WJ pump [have pump]
Install BJs in spare HP30, install into truck w/ new UCAs [have parts except BJs]
everything is on hold until after my Professional Engineering licensure test is complete (middle of April). Short term plans in the works for Spring:\ Doorless mod (front doors) (with soft doors?) Monstaline the interior [have kit] TC Linkage mod [have parts] Exhaust Manifold Replacement and tailpipe repair [have parts] Finish replacing rear drum brake pads and piston [have parts] 2x6 Rocker Replacement Sliders Replace H.P. Steering line and install WJ pump [have pump] Install BJs in spare HP30, install into truck w/ new UCAs [have parts except BJs]
You should do a write-up on the slider install. I'm looking to do it this summer as well.
Or at least take a bunch of pictures and post them. Lol.
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
also, the wife got me an awesome birthday present. Just need to figure out how/where to mount them...the small one fits fine, but the big one is HUGE. I want to mount them to the passenger side of the engine, but to fit the big one i need to remove the a/c compressor
x2 on finally hitting 300k.