project "custom"
05-28-2010, 12:13 PM
#16
Registered Users
Join Date: Dec 2009
Location: Everett, WA
Posts: 1,859
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
oh my. 11.5 lift you can easily stuff some 40's under it
looks like it will roll hitting a rock in the road
or just lower it 6 inches............
punctuation!
looks like it will roll hitting a rock in the road
yeah its done now i will post up some newer pics next week its going out to muddigras this weekend and i will get some pics of it going and i am def going to do a snorkle i just ran outta of time i am leaving tommorrow to take up there but there is def more work to do i am going to run rear track bars to help support the rear end when its trying to turn the bigger tires
05-30-2010, 03:04 PM
#17
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Palm city
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0 AMC
i just got back from my weekend with nothing broken they are stock axles and nothing has broke the only thing i do need is gears the motor can not turn those tires to easily so i am going to put some 4.56 gears in to help it it didnt roll and like i said before is that there is no hills even close to anything i have to worry about in south fl
05-30-2010, 03:17 PM
#18
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Palm city
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0 AMC
and heres how you get 11 inchs i welded a plate to the bottom of were the stock spring is suppose to go then but a 2 in spacer om the bottom of that that by it self was 5in then the 6.5 inch springs give me the rest and i didnt cut any fenders on it at all
i know the pic is bad but the jeep is still covered in mud
i know the pic is bad but the jeep is still covered in mud
05-31-2010, 04:37 PM
#21
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
Can you get a pic without the mud cause I can't make out anything in that one. Just curious what is holding the spring in place.
05-31-2010, 09:29 PM
#23
CF Veteran
Join Date: Feb 2010
Location: La Habra, CA
Posts: 1,152
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Engine: 4.0 RENIX
what's your steering setup? please dont end up on this site: http://128.83.80.200/taco/scarysteering.html
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)